Browse Car Specifications...

Leon 3 ST Versions

Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Specs

(2014 - ) Years Technical Specifications
With a fuel consumption of 3.3 litres/100km - 86 mpg UK - 71 mpg US (Average), 0 to 100 km/h (62mph) in 10.6 seconds, a maximum top speed of 124 mph (199 km/h), a curb weight of 2822 lbs (1280 kgs), the Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference has a turbocharged In-line 4 cylinder engine, Diesel motor.
This engine produces a maximum power of 110 PS (109 bhp - 81 kW) at 3200-4000 rpm and a maximum torque of 250 Nm (184 lb.ft) at 1500-3000 rpm. The power is transmitted to the road by the front wheel drive (FWD) with a 6 speed Manual gearbox.
About chassis details responsible for road holding, handling behaviour and ride confort, the Leon 3 ST has McPherson struts. Coil springs. front suspension and Coil springs. Torsion bar. rear suspension. Stock tire sizes are 205 / 55 on 16 inch rims at the front, and 205 / 55 on 16 inch rims at the rear. For stopping power, the Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference braking system includes Vented Discs at the front and Discs at the rear.
The Leon 3 ST model is a Estate car manufactured by Seat, with 5 doors and 5 seats, sold new from year 2014.

Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Engine Technical Data Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Engine Technical Data

Engine type - Number of cylinders : I 4
Engine Code : -
Fuel type :
Diesel
Fuel System : Direct Injection.
Engine Alignment : Transverse
Engine Position : Front
Engine size - Displacement - Engine capacity : 1598 cm3 or 97.5 cu-in
Bore x Stroke : 79.5 x 80.5 mm
3.11 x 3.15 inches
Number of valves : 16 Valves
Aspiration : Turbo (TGV) + Intercooler
Compression Ratio : 16,2
Maximum power - Output - Horsepower : 110 PS or 109 bhp or 81 kW @ 3200-4000 rpm
Maximum torque : 250 Nm or 184 lb.ft @ 1500-3000 rpm
Drive wheels - Traction - Drivetrain : FWD
Transmission Gearbox - Number of speeds :
Clutch Type : Dry single disc clutch

Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Fuel Consumption (Economy), Emissions and Range Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Fuel Consumption (Economy), Emissions and Range

Fuel Consumption - Economy - Combined: 3.3 L/100km
86 mpg UK / 71 mpg US
Fuel Consumption - Economy - Extra Urban: 3.1 L/100km
91 mpg UK / 76 mpg US
Fuel Consumption - Economy - City: 3.9 L/100km
72 mpg UK / 60 mpg US
Fuel Tank Capacity : 50 L
11 UK gallons
13.2 US gallons
Range : 1515 Km or 942 miles
CO2 emissions : 87 g/Km (Seat)

Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Performance Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Performance

Top Speed : 199 km/h or 124 Mph
Acceleration 0 to 100 km/h (0 to 62 mph) : 10.6 s
Acceleration 0 to 1000m : 32.2 s

Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Size, Dimensions, Aerodynamics and Weight Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Size, Dimensions, Aerodynamics and Weight

Body : Estate
Num. of Doors : 5
Wheelbase : 263.6 cm or 103.78 inches
Length : 453.5 cm or 178.54 inches
Width : 181.6 cm or 71.5 inches
Height : 145.4 cm or 57.24 inches
Front Axle : 154.4 cm or 60.79 inches
Rear Axle : 151.4 cm or 59.61 inches
Num. of Seats : 5
Aerodynamic drag coefficient - Cx : -
Front Brakes - Disc dimensions : Vented Discs (288 mm)
Rear Brakes - Dics dimensions : Discs (253 mm)
Front Tyres - Rims dimensions : 205/55 R16
Rear Tyres - Rims dimensions : 205/55 R16
Front Wheels Width : 6,5"
Rear Wheels Width : 6,5"
Curb Weight : 1280 kg OR 2822 lbs
Weight-Power Output Ratio : 11.6 kg/hp
Trunk / Boot capacity : 587 L
Steering : Rack and pinion Electric
Front Suspension : McPherson struts. Coil springs.
Rear Suspension : Coil springs. Torsion bar.

Seat Leon 3 ST Ecomotive 1.6 TDI CR 110HP Start&Stop Reference Service Light Reset

not available yet
If you found an error in this spec, please report it to Contact US