Browse Car Specifications...

Toledo I Versions


Seat Toledo I 2.0i Specs

(1991 - 1995) - Technical Specifications for Years 1991, 1992, 1993, 1994, 1995
With a fuel consumption of 8.2 litres/100km - 34 mpg UK - 29 mpg US (Average), 0 to 100 km/h (62mph) in 10.5 seconds, a maximum top speed of 122 mph (196 km/h), a curb weight of 2260 lbs (1025 kgs), the Toledo I 2.0i has a naturally-aspirated Inline 4 cylinder engine, Petrol motor.
This engine produces a maximum power of 116 PS (114 bhp - 85 kW) at 5400 rpm and a maximum torque of 166 Nm (122 lb.ft) at 3200 rpm. The power is transmitted to the road by the front wheel drive (FWD) with a 5 speed Manual gearbox.
On the topic of chassis details responsible for road holding, handling behavior and ride comfort, the Toledo I has Independent. McPherson. coil springs. anti-roll bar front suspension and - rear suspension. Stock tire sizes are 185 / 60 on 14 inch rims at the front, and 185 / 60 on 14 inch rims at the rear. For stopping power, the Toledo I 2.0i braking system includes Vented Discs at the front and Discs at the rear.
The Toledo I model is a car manufactured by Seat, sold new from year 1991 until 1995, and available after that as a used car.

Seat Toledo I 2.0i Engine Technical Data Seat Toledo I 2.0i Engine Technical Data

Engine type - Number of cylinders : Inline 4
Engine Code : -
Fuel type : Petrol
Fuel System : MPI
Engine Alignment : Transverse
Engine size - Displacement - Engine capacity : 1984 cm3 or 121.1 cu-in
Bore x Stroke : 82.5 x 92.8 mm
3.23 x 3.62 inches
Number of valves : 8 Valves
Aspiration : N/A
Compression Ratio : 10.0
Maximum power - Output - Horsepower : 116 PS or 114 bhp or 85 kW @ 5400 rpm
Maximum torque : 166 Nm or 122 lb.ft @ 3200 rpm
Drive wheels - Traction - Drivetrain : FWD
Transmission Gearbox - Number of speeds :

Seat Toledo I 2.0i Fuel Consumption (Economy), Emissions and Range Seat Toledo I 2.0i Fuel Consumption (Economy), Emissions and Range

Fuel Consumption - Economy - Combined: 8.2 L/100km
34 mpg UK / 29 mpg US
Range : 670 Km or 416 miles
Fuel Tank Capacity : 55 L
12.1 UK gallons
14.5 US gallons
CO2 emissions : 191 g/Km (estimate)

Seat Toledo I 2.0i Performance Seat Toledo I 2.0i Performance

Top Speed : 196 km/h or 122 Mph
Acceleration 0 to 100 km/h (0 to 62 mph) : 10.5 s

Seat Toledo I 2.0i Size, Dimensions, Aerodynamics and Weight Seat Toledo I 2.0i Size, Dimensions, Aerodynamics and Weight

Num. of Doors : 4
Wheelbase : 247 cm or 97.24 inches
Length : 432 cm or 170.08 inches
Width : 166 cm or 65.35 inches
Height : 142 cm or 55.91 inches
Aerodynamic drag coefficient - Cx : -
Front Brakes - Disc dimensions : Vented Discs (- mm)
Rear Brakes - Dics dimensions : Discs (- mm)
Front Tyres - Rims dimensions : 185/60 R14
Rear Tyres - Rims dimensions : 185/60 R14
Curb Weight : 1025 kg OR 2260 lbs
Weight-Power Output Ratio : 8.8 kg/hp
Trunk / Boot capacity : 550-1360 L
Front Suspension : Independent. McPherson. coil springs. anti-roll bar
Rear Suspension : -
What engine is in Seat Toledo I 2.0i?
The Seat Toledo I 2.0i has a Inline 4, Petrol engine with 1984 cm3 / 121.1 cu-in capacity.

How many horsepower (hp) does a 1991 Seat Toledo I 2.0i have?
The 1991 Seat Toledo I 2.0i has 116 PS / 114 bhp / 85 kW.

How much does a Seat Toledo I 2.0i weighs?
The Seat Toledo I 2.0i weighs 1025 Kg / 2260 lbs.

What is the top speed of a Seat Toledo I 2.0i?
The Seat Toledo I 2.0i top speed is 196 Km/h / 122 mph.

Is Seat Toledo I 2.0i All Wheel Drive (AWD)?
No, the Seat Toledo I 2.0i is not All Wheel Drive (AWD). It's Front Wheel Drive (FWD).

If you found an error in these specifications