Browse Car Specifications...

Partner 2 Versions

Peugeot Partner 2 Tepee Active e-HDi 92 SST Specs

(2013 - ) Years Technical Specifications
With a fuel consumption of 4.7 litres/100km - 60 mpg UK - 50 mpg US (Average), 0 to 100 km/h (62mph) in 14.3 seconds, a maximum top speed of 103 mph (165 km/h), a curb weight of 3075 lbs (1395 kgs), the Partner 2 Tepee Active e-HDi 92 SST has a turbocharged In-line 4 cylinder engine, Diesel motor.
This engine produces a maximum power of 92 PS (91 bhp - 68 kW) at 4000 rpm and a maximum torque of 230 Nm (169 lb.ft) at 1750 rpm. The power is transmitted to the road by the front wheel drive (FWD) with a 5 speed Manual gearbox.
About chassis details responsible for road holding, handling behaviour and ride confort, the Partner 2 has McPherson struts. Coil springs. front suspension and Coil springs. Torsion bar. rear suspension. Stock tire sizes are 205 / 65 on 15 inch rims at the front, and 205 / 65 on 15 inch rims at the rear. For stopping power, the Partner 2 Tepee Active e-HDi 92 SST braking system includes Vented Discs at the front and Discs at the rear.
The Partner 2 model is a car manufactured by Peugeot, with 5 doors and 5 seats, sold new from year 2013.

Peugeot Partner 2 Tepee Active e-HDi 92 SST Engine Technical Data Peugeot Partner 2 Tepee Active e-HDi 92 SST Engine Technical Data

Engine type - Number of cylinders : I 4
Engine Code : -
Fuel type :
Diesel
Fuel System : Direct Injection.
Engine Alignment : Transverse
Engine Position : Front
Engine size - Displacement - Engine capacity : 1560 cm3 or 95.2 cu-in
Bore x Stroke : 75.0 x 88.3 mm
2.95 x 3.46 inches
Number of valves : 8 Valves
Aspiration : Turbo + Intercooler
Compression Ratio : 16,0
Maximum power - Output - Horsepower : 92 PS or 91 bhp or 68 kW @ 4000 rpm
Maximum torque : 230 Nm or 169 lb.ft @ 1750 rpm
Drive wheels - Traction - Drivetrain : FWD
Transmission Gearbox - Number of speeds :
Clutch Type : Dry single disc clutch

Peugeot Partner 2 Tepee Active e-HDi 92 SST Fuel Consumption (Economy), Emissions and Range Peugeot Partner 2 Tepee Active e-HDi 92 SST Fuel Consumption (Economy), Emissions and Range

Fuel Consumption - Economy - Combined: 4.7 L/100km
60 mpg UK / 50 mpg US
Fuel Consumption - Economy - Extra Urban: 4.4 L/100km
64 mpg UK / 53 mpg US
Fuel Consumption - Economy - City: 5.3 L/100km
53 mpg UK / 44 mpg US
Fuel Tank Capacity : 60 L
13.2 UK gallons
15.9 US gallons
Range : 1276 Km or 793 miles
CO2 emissions : 123 g/Km (Peugeot)

Peugeot Partner 2 Tepee Active e-HDi 92 SST Performance Peugeot Partner 2 Tepee Active e-HDi 92 SST Performance

Top Speed : 165 km/h or 103 Mph
Acceleration 0 to 100 km/h (0 to 62 mph) : 14.3 s

Peugeot Partner 2 Tepee Active e-HDi 92 SST Size, Dimensions, Aerodynamics and Weight Peugeot Partner 2 Tepee Active e-HDi 92 SST Size, Dimensions, Aerodynamics and Weight

Num. of Doors : 5
Wheelbase : 272.8 cm or 107.4 inches
Length : 438 cm or 172.44 inches
Width : 181 cm or 71.26 inches
Height : 180.1 cm or 70.91 inches
Front Axle : 150.5 cm or 59.25 inches
Rear Axle : 155.4 cm or 61.18 inches
Num. of Seats : 5
Aerodynamic drag coefficient - Cx : -
Front Brakes - Disc dimensions : Vented Discs (- mm)
Rear Brakes - Dics dimensions : Discs (- mm)
Front Tyres - Rims dimensions : 205/65 R15
Rear Tyres - Rims dimensions : 205/65 R15
Curb Weight : 1395 kg OR 3075 lbs
Weight-Power Output Ratio : 15.2 kg/hp
Trunk / Boot capacity : 675 L
Steering : Rack and pinion Hydraulic
Front Suspension : McPherson struts. Coil springs.
Rear Suspension : Coil springs. Torsion bar.

Peugeot Partner 2 Tepee Active e-HDi 92 SST Service Light Reset

not available yet
If you found an error in this spec, please report it to Contact US