Browse Car Specifications...

Panda Classic Versions

Fiat Panda Classic 4x4 1.2 69HP Climbing Specs

(2011 - 2012) - Technical Specifications for Years 2011, 2012
With a fuel consumption of 6 litres/100km - 47 mpg UK - 39 mpg US (Average), 0 to 100 km/h (62mph) in 15.3 seconds, a maximum top speed of 92 mph (148 km/h), a curb weight of 2293 lbs (1040 kgs), the Panda Classic 4x4 1.2 69HP Climbing has a naturally-aspirated In-line 4 cylinder engine, Petrol motor.
This engine produces a maximum power of 69 PS (68 bhp - 51 kW) at 5500 rpm and a maximum torque of 102 Nm (75 lb.ft) at 3000 rpm. The power is transmitted to the road by the all wheel drive (AWD) with a 5 speed Manual gearbox.
About chassis details responsible for road holding, handling behaviour and ride confort, the Panda Classic has McPherson struts. Coil springs. front suspension and Independent. Coil springs. rear suspension. Stock tire sizes are 185 / 65 on 14 inch rims at the front, and 185 / 65 on 14 inch rims at the rear. For stopping power, the Panda Classic 4x4 1.2 69HP Climbing braking system includes Vented Discs at the front and Discs at the rear.
The Panda Classic model is a Turismo car manufactured by Fiat, with 5 doors and 4 seats, sold new from year 2011 to 2012, and available after that as a used car.

Fiat Panda Classic 4x4 1.2 69HP Climbing Engine Technical Data Fiat Panda Classic 4x4 1.2 69HP Climbing Engine Technical Data

Engine type - Number of cylinders : I 4
Engine Code : -
Fuel type :
Petrol
Fuel System : Indirect Injection.
Engine Alignment : Transverse
Engine Position : Front
Engine size - Displacement - Engine capacity : 1242 cm3 or 75.8 cu-in
Bore x Stroke : 70.8 x 78.9 mm
2.76 x 3.07 inches
Number of valves : 8 Valves
Aspiration : N/A
Compression Ratio : 11,1
Maximum power - Output - Horsepower : 69 PS or 68 bhp or 51 kW @ 5500 rpm
Maximum torque : 102 Nm or 75 lb.ft @ 3000 rpm
Drive wheels - Traction - Drivetrain : AWD
Transmission Gearbox - Number of speeds :

Fiat Panda Classic 4x4 1.2 69HP Climbing Fuel Consumption (Economy), Emissions and Range Fiat Panda Classic 4x4 1.2 69HP Climbing Fuel Consumption (Economy), Emissions and Range

Fuel Consumption - Economy - Combined: 6 L/100km
47 mpg UK / 39 mpg US
Fuel Consumption - Economy - Extra Urban: 5.3 L/100km
53 mpg UK / 44 mpg US
Fuel Consumption - Economy - City: 7.3 L/100km
39 mpg UK / 32 mpg US
Fuel Tank Capacity : 35 L
7.7 UK gallons
9.2 US gallons
Range : 583 Km or 362 miles
CO2 emissions : 139 g/Km (Fiat)

Fiat Panda Classic 4x4 1.2 69HP Climbing Performance Fiat Panda Classic 4x4 1.2 69HP Climbing Performance

Top Speed : 148 km/h or 92 Mph
Acceleration 0 to 100 km/h (0 to 62 mph) : 15.3 s

Fiat Panda Classic 4x4 1.2 69HP Climbing Size, Dimensions, Aerodynamics and Weight Fiat Panda Classic 4x4 1.2 69HP Climbing Size, Dimensions, Aerodynamics and Weight

Body : Turismo
Num. of Doors : 5
Wheelbase : 230.5 cm or 90.75 inches
Length : 357.4 cm or 140.71 inches
Width : 160.5 cm or 63.19 inches
Height : 163.2 cm or 64.25 inches
Front Axle : 136.6 cm or 53.78 inches
Rear Axle : 135.8 cm or 53.46 inches
Num. of Seats : 4
Aerodynamic drag coefficient - Cx : -
Front Brakes - Disc dimensions : Vented Discs (240 mm)
Rear Brakes - Dics dimensions : Discs (240 mm)
Front Tyres - Rims dimensions : 185/65 R14
Rear Tyres - Rims dimensions : 185/65 R14
Front Wheels Width : 5,5"
Rear Wheels Width : 5,5"
Curb Weight : 1040 kg OR 2293 lbs
Weight-Power Output Ratio : 15.1 kg/hp
Trunk / Boot capacity : 200 L
Steering : Rack and pinion Electric
Front Suspension : McPherson struts. Coil springs.
Rear Suspension : Independent. Coil springs.

Fiat Panda Classic 4x4 1.2 69HP Climbing Service Light Reset

not available yet
If you found an error in this spec, please report it to Contact US