Browse Car Specifications...

Panda Classic Versions

Fiat Panda Classic 1.3 Multijet 75HP Specs

(2011 - 2012) - Technical Specifications for Years 2011, 2012
With a fuel consumption of 4.2 litres/100km - 67 mpg UK - 56 mpg US (Average), 0 to 100 km/h (62mph) in 13.1 seconds, a maximum top speed of 103 mph (165 km/h), a curb weight of - lbs ( kgs), the Panda Classic 1.3 Multijet 75HP has a turbocharged In-line 4 cylinder engine, Diesel motor.
This engine produces a maximum power of 75 PS (74 bhp - 55 kW) at 4000 rpm and a maximum torque of 145 Nm (106 lb.ft) at 1400 rpm. The power is transmitted to the road by the front wheel drive (FWD) with a 5 speed Manual gearbox.
About chassis details responsible for road holding, handling behaviour and ride confort, the Panda Classic has McPherson struts. Coil springs. front suspension and Independent. Coil springs. rear suspension. Stock tire sizes are 155 / 80 on 13 inch rims at the front, and 155 / 80 on 13 inch rims at the rear. For stopping power, the Panda Classic 1.3 Multijet 75HP braking system includes Vented Discs at the front and Drums at the rear.
The Panda Classic model is a Turismo car manufactured by Fiat, with 5 doors and 4 seats, sold new from year 2011 to 2012, and available after that as a used car.

Fiat Panda Classic 1.3 Multijet 75HP Engine Technical Data Fiat Panda Classic 1.3 Multijet 75HP Engine Technical Data

Engine type - Number of cylinders : I 4
Engine Code : -
Fuel type :
Diesel
Fuel System : Direct Injection.
Engine Alignment : Transverse
Engine Position : Front
Engine size - Displacement - Engine capacity : 1248 cm3 or 76.2 cu-in
Bore x Stroke : 69.6 x 82.0 mm
2.72 x 3.23 inches
Number of valves : 16 Valves
Aspiration : Turbo + Intercooler
Compression Ratio : 16,8
Maximum power - Output - Horsepower : 75 PS or 74 bhp or 55 kW @ 4000 rpm
Maximum torque : 145 Nm or 106 lb.ft @ 1400 rpm
Drive wheels - Traction - Drivetrain : FWD
Transmission Gearbox - Number of speeds :

Fiat Panda Classic 1.3 Multijet 75HP Fuel Consumption (Economy), Emissions and Range Fiat Panda Classic 1.3 Multijet 75HP Fuel Consumption (Economy), Emissions and Range

Fuel Consumption - Economy - Combined: 4.2 L/100km
67 mpg UK / 56 mpg US
Fuel Consumption - Economy - Extra Urban: 3.6 L/100km
78 mpg UK / 65 mpg US
Fuel Consumption - Economy - City: 5.2 L/100km
54 mpg UK / 45 mpg US
Fuel Tank Capacity : 35 L
7.7 UK gallons
9.2 US gallons
Range : 833 Km or 518 miles
CO2 emissions : 109 g/Km (Fiat)

Fiat Panda Classic 1.3 Multijet 75HP Performance Fiat Panda Classic 1.3 Multijet 75HP Performance

Top Speed : 165 km/h or 103 Mph
Acceleration 0 to 100 km/h (0 to 62 mph) : 13.1 s

Fiat Panda Classic 1.3 Multijet 75HP Size, Dimensions, Aerodynamics and Weight Fiat Panda Classic 1.3 Multijet 75HP Size, Dimensions, Aerodynamics and Weight

Body : Turismo
Num. of Doors : 5
Wheelbase : 229.9 cm or 90.51 inches
Length : 353.8 cm or 139.29 inches
Width : 157.8 cm or 62.13 inches
Height : 154 cm or 60.63 inches
Front Axle : 136.6 cm or 53.78 inches
Rear Axle : 135.8 cm or 53.46 inches
Num. of Seats : 4
Aerodynamic drag coefficient - Cx : -
Front Brakes - Disc dimensions : Vented Discs (240 mm)
Rear Brakes - Dics dimensions : Drums (180 mm)
Front Tyres - Rims dimensions : 155/80 R13
Rear Tyres - Rims dimensions : 155/80 R13
Curb Weight : - kg OR - lbs
Trunk / Boot capacity : 206 L
Steering : Rack and pinion Electric
Front Suspension : McPherson struts. Coil springs.
Rear Suspension : Independent. Coil springs.

Fiat Panda Classic 1.3 Multijet 75HP Service Light Reset

not available yet

Popular comparisons with this car

If you found an error in this spec, please report it to Contact US