John Deere 5095MH Specs
(2008)
John Deere 5095MH General Information |
|
| Brand | John Deere |
| Model | John Deere 5095MH |
| Start year | 2008 |
| End year | - |
| Category / Type | High-Clearance tractor |
| Distributor | - |
| Manufacturer | John Deere |
| Factory | Augusta, Georgia, USA |
| Serial Number Location | Tractor frame on front left side. |
| Number of total built | - |
| Original Price (in USD) | $51,710 (2010 - ROPS) |
John Deere 5095MH Chassis, dimensions, weight and tires |
|
| Cabin Type | Foldable ROPS. Optional cab with heat and air conditioning. |
| Wheelbase | 85.6 in |
| Length | - in |
| Fuel Capacity | 30.3 (ROPS) |
| Operating Weight | - lbs |
| Front Tyres - Rims dimensions | - |
| Rear Tyres - Rims dimensions | - |
| Steering type | hydrostatic power |
| Brakes type | hydraulic wet disc |
John Deere 5095MH Electrical System |
|
| Charging System | alternator |
| Charging Voltage | - volts |
| Ground | negative |
| Charging Amperage | 70 (ROPS) / 120 (optional) A |
| Number of batteries | 1 |
| Battery - voltage | 12 volts |
| Battery - Amp / Hour | - Ah |
| Battery - Cold Cranking Amperage | 925 A |
| Battery - Group | 31 |
| Engine Starter - voltage | 12 v |
John Deere 5095MH Engine and Transmission Technical Data |
|
| Number of cylinders | 4-cylinder |
| Fuel Type | turbocharged diesel |
| Engine Code | John Deere PowerTech M 4045 |
| Engine size - Displacement - Engine capacity | 276 ci |
| Bore x Stroke | 4.19x5.00 |
| Compression Ratio | - |
| Maximum power - Output - Horsepower | - hp @ 2200 rpm |
| Engine Cooling Type | liquid-cooled |
| Engine Air Filter / Cleaner | dry |
| Transmission Type | partially synchronized with power shuttle PowrReverser Plus |
| Transmission / Gearbox gears | 32 forward and 16 reverse |
| Transmission Clutch | - |
| Drive wheels - Traction - Drivetrain | 4x4 MFWD 4WD |
John Deere 5095MH PTO - Power Take-Off |
|
| Rear PTO Type | independent electrochydraulic |
| Rear PTO Power (Tested) | 80 hp ( - hp) |
| Rear PTO RPM | 540/540E |
John Deere 5095MH Drawbar |
|
| Drawbar Power (Tested) | - hp ( - hp) |
John Deere 5095MH Hydraulics |
|
| Type | - |
| Nº of valves | - |
| Pump flow | 18.4 gpm |
| Steering flow | 6.3 gpm |