John Deere 1025R Specs
(2013)
John Deere 1025R General Information |
|
| Brand | John Deere |
| Model | John Deere 1025R |
| Start year | 2013 |
| End year | - |
| Category / Type | Sub-Compact Utility tractor |
| Distributor | - |
| Manufacturer | John Deere |
| Factory | Augusta, Georgia, USA |
| Serial Number Location | Serial number plate on the right side of the 1025R frame, above the front axle. |
| Number of total built | - |
| Original Price (in USD) | $13,361 (2013 ) |
John Deere 1025R Chassis, dimensions, weight and tires |
|
| Cabin Type | Two-post foldable ROPS on semi-flat platform. |
| Wheelbase | 57.1 in |
| Length | 87.6 , 102.6 (with hitch) in |
| Fuel Capacity | 5.6 |
| Operating Weight | - lbs |
| Front Tyres - Rims dimensions | - |
| Rear Tyres - Rims dimensions | - |
| Steering type | power |
| Brakes type | wet disc |
John Deere 1025R Electrical System |
|
| Charging System | - |
| Charging Voltage | - volts |
| Ground | negative |
| Charging Amperage | - A |
| Number of batteries | 1 |
| Battery - voltage | 12 volts |
| Battery - Amp / Hour | - Ah |
| Battery - Cold Cranking Amperage | 500 A |
| Battery - Group | - |
| Engine Starter - voltage | 12 v |
John Deere 1025R Engine and Transmission Technical Data |
|
| Number of cylinders | 3-cylinder |
| Fuel Type | diesel |
| Engine Code | Yanmar 3TNV80 |
| Engine size - Displacement - Engine capacity | 77.2 ci |
| Bore x Stroke | 3.15x3.31 |
| Compression Ratio | 23.5:1 |
| Maximum power - Output - Horsepower | 23.8 hp @ 3200 rpm |
| Engine Cooling Type | liquid-cooled |
| Engine Air Filter / Cleaner | dry |
| Transmission Type | hydrostatic - |
| Transmission / Gearbox gears | infinite (2-range) forward and reverse |
| Transmission Clutch | - |
| Drive wheels - Traction - Drivetrain | 4x4 MFWD 4WD |
John Deere 1025R PTO - Power Take-Off |
|
| Rear PTO Type | independent |
| Rear PTO Power (Tested) | 18 hp ( - hp) |
| Rear PTO RPM | 540 |
John Deere 1025R Drawbar |
|
| Drawbar Power (Tested) | - hp ( - hp) |
John Deere 1025R Hydraulics |
|
| Type | open center |
| Nº of valves | 2 or 3 |
| Pump flow | 3.5 gpm |
| Steering flow | 2.8 gpm |