Yamaha IT 250 Specs
The Yamaha IT 250 model is a Enduro / offroad bike manufactured by Yamaha . In this version sold from year 1982 , the dry weight is and it is equiped with a Single cylinder, two-stroke motor. The engine produces a maximum peak output power of and a maximum torque of . With this drive-train, the Yamaha IT 250 is capable of reaching a maximum top speed of . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Yamaha IT 250 have a Steel tubing frame with front suspension being Conventional forks and in the rear suspension it is equiped with Mono-x triangular swingarm . Stock tire sizes are -21 on the front, and -18 on the rear. As for stopping power, the Yamaha IT 250 braking system includes Expanding brake (drum brake). cable size at the front and Expanding brake (drum brake). mechanical link size at the rear.
Yamaha IT 250 General Information
|
|
| Brand |
Yamaha |
|
| Model |
Yamaha IT 250 |
|
| Year |
1982 |
|
| Year |
1982 |
|
| Category |
Enduro / offroad |
|
| Factory Warranty (Years / miles) |
|
Yamaha IT 250 Dimensions, Aerodynamics and weight
|
|
| Frame type |
Steel tubing |
|
| Seat details |
|
|
| Wheelbase |
|
|
| Length |
|
|
| Width |
|
|
| Height |
|
|
| Seat Height |
|
|
| Alternate Seat Height |
|
|
| Ground Clearance |
|
|
| Trail size |
|
|
| Wheels details |
|
|
| Front Tyres - Rims dimensions |
-21 |
|
| Rear Tyres - Rims dimensions |
-18 |
|
| Front brakes |
Expanding brake (drum brake). cable |
|
| Rear brakes |
Expanding brake (drum brake). mechanical link |
|
| Front Brakes Dimensions - Disc Dimensions |
|
|
| Rear Brakes Dimensions - Disc Dimensions |
|
|
| Curb Weight (including fluids) |
95.3 kg (210.0 pounds) |
|
| Dry Weight |
|
|
| Front Percentage of Weight |
|
|
| Rear Percentage of Weight |
|
|
| Weight-Power Output Ratio : |
|
|
| Fuel Tank Capacity |
|
|
| Reserve Fuel Capacity |
1.13 litres (0.30 gallons) |
|
| Carrying Details and Capacity |
|
|
| Front Suspension |
Conventional forks |
|
| Front Suspension Travel |
|
|
| Rear Suspension |
Mono-x triangular swingarm |
|
| Rear Suspension Travel |
|
Yamaha IT 250 Engine and Transmission Technical Data
|
|
| Engine type - Number of cylinders |
Single cylinder, two-stroke |
|
| Engine details |
|
|
| Fuel system |
Carburettor. Mikuni round 34 mm, intake resonator |
|
| Engine size - Displacement - Engine capacity |
247.00 ccm (15.07 cubic inches) |
|
| Bore x Stroke |
|
|
| Compression Ratio |
|
|
| Number of valves per cylinder |
|
|
| Camshaft Valvetrain Configuration |
Membrane |
|
| Maximum power - Output - Horsepower |
|
|
| Maximum torque |
|
|
| Engine Maximum RPM |
|
|
| Cooling system |
Air |
|
| Lubrication system |
Pre-mix |
|
| Engine oil capacity |
|
|
| Exhaust system |
expansion chamber |
|
| Gearbox |
6-speed |
|
| Transmission type, final drive ratio |
Chain |
|
| Clutch type |
Wet plate |
|
| Driveline |
|
Yamaha IT 250 Performance
|
|
| Top Speed |
|
|
| Acceleration 0 to 100 km/h (0 to 62 mph) |
|
|
| Acceleration 0 to 400m (1/4 mile) |
|
|
| Recuperation 60 to 140 km/h in highest gear |
|
|
| Fuel Consumption - MPG - Economy - Efficiency |
|
|
| CO2 emissions |
|
|
| Emissions |
|
Yamaha IT 250 Electrical Systems, Ignition and Equipment
|
|
| Ignition Type |
CDI |
|
| Electrical Details |
|
|
| Starter Type |
Kick |
|
| Instruments |
|
|
| Lights |
|
|
