Triumph Tiger 1050 SE Specs
(2011)
Triumph Tiger 1050 SE General Information |
|
| Brand | Triumph |
| Model | Triumph Tiger 1050 SE |
| Start year | 2011 |
| Year | 2011 |
| Category | Allround |
| Factory Warranty (Years / miles) | - |
Triumph Tiger 1050 SE Dimensions, Aerodynamics and weight |
|
| Frame type | Aluminum beam twin spar |
| Seat details | - |
| Wheelbase | 1,509 mm (59.4 inches) |
| Length | 2,108 mm (83.0 inches) |
| Width | 838 mm (33.0 inches) |
| Height | 1,318 mm (51.9 inches) |
| Seat Height | 833 mm (32.8 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | - |
| Wheels details | - |
| Front Tyres - Rims dimensions | 120/70-ZR17 |
| Rear Tyres - Rims dimensions | 180/55-ZR17 |
| Front brakes | Double disc |
| Rear brakes | Single disc |
| Front Brakes Dimensions - Disc Dimensions | 320 mm (12.6 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 255 mm (10.0 inches) |
| Curb Weight (including fluids) | 227.7 kg (502.0 pounds) |
| Dry Weight | - |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | - |
| Fuel Tank Capacity | 20.06 litres (5.30 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Showa 43mm upside down forks with adjustable preload. rebound and compression damping. 150mm travel |
| Front Suspension Travel | - |
| Rear Suspension | Showa Monoshock with adjustable preload and rebound damping 150mm rear wheel travel |
| Rear Suspension Travel | - |
Triumph Tiger 1050 SE Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | In-line three, four-stroke |
| Engine details | - |
| Fuel system | Injection. Multipoint sequential electronic fuel injection with SAI |
| Engine size - Displacement - Engine capacity | 1050.00 ccm (64.07 cubic inches) |
| Bore x Stroke | 79.0 x 71.4 mm (3.1 x 2.8 inches) |
| Compression Ratio | 12.0:1 |
| Number of valves per cylinder | 4 |
| Camshaft Valvetrain Configuration | DOHC |
| Maximum power - Output - Horsepower | 111.00 HP (81.0 kW) @ 9400 RPM |
| Maximum torque | 97.63 Nm (10.0 kgf-m or 72.0 ft.lbs) @ 6250 RPM |
| Engine Maximum RPM | - |
| Cooling system | Liquid |
| Lubrication system | - |
| Engine oil capacity | - |
| Exhaust system | - |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Wet. multi-plate |
| Driveline | X ring chain. Primary drive: Gear. |
Triumph Tiger 1050 SE Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
Triumph Tiger 1050 SE Electrical Systems, Ignition and Equipment |
|
| Ignition Type | Digital-inductive type via engine management system |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much horsepower does a Triumph Tiger 1050 SE has?
The Triumph Tiger 1050 SE has 111.00 HP (81.0 kW) @ 9400 RPM.
How tall (seat height) is a Triumph Tiger 1050 SE?
The Triumph Tiger 1050 SE seat height is 833 mm (32.8 inches) If adjustable, lowest setting.
How many gears does a Triumph Tiger 1050 SE has?
The Triumph Tiger 1050 SE has 6 gears.
The Triumph Tiger 1050 SE has 111.00 HP (81.0 kW) @ 9400 RPM.
How tall (seat height) is a Triumph Tiger 1050 SE?
The Triumph Tiger 1050 SE seat height is 833 mm (32.8 inches) If adjustable, lowest setting.
How many gears does a Triumph Tiger 1050 SE has?
The Triumph Tiger 1050 SE has 6 gears.