English Français Deutsch Svensk Português PT Español русский Italiano 中文 български Nederlands Polski Português BR Türkçe
UltimateSpecs.com   Cars Motorcycles
Motorcycles Specs > Suzuki > Suzuki Intruder Classic 400 Cast Wheel

Suzuki Intruder Classic 400 Cast Wheel Specs

The Suzuki Intruder Classic 400 Cast Wheel model is a Custom / cruiser bike manufactured by Suzuki . In this version sold from year 2012 , the dry weight is 276.0 kg (608.5 pounds) and it is equiped with a V2, four-stroke motor. The engine produces a maximum peak output power of 33.00 HP (24.1 kW) @ 8000 RPM and a maximum torque of 33.00 Nm (3.4 kgf-m or 24.3 ft.lbs) @ 6000 RPM . With this drive-train, the Suzuki Intruder Classic 400 Cast Wheel is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Suzuki Intruder Classic 400 Cast Wheel have a Double cradle frame with front suspension being  and in the rear suspension it is equiped with  . Stock tire sizes are 130/90-16 on the front, and 170/80-15 on the rear. As for stopping power, the Suzuki Intruder Classic 400 Cast Wheel braking system includes Single disc. Hydraulic size  at the front and Expanding brake (drum brake) size  at the rear. 

Suzuki Intruder Classic 400 Cast Wheel General Information

Brand Suzuki 
Model Suzuki Intruder Classic 400 Cast Wheel 
Year 2012 
Year 2012 
Category Custom / cruiser 
Factory Warranty (Years / miles)  

Suzuki Intruder Classic 400 Cast Wheel Dimensions, Aerodynamics and weight

Frame type Double cradle 
Seat details Tandem seat 
Wheelbase 1,655 mm (65.2 inches) 
Length 2,080 mm (81.9 inches) 
Width  
Height  
Seat Height 700 mm (27.6 inches) If adjustable, lowest setting. 
Alternate Seat Height  
Ground Clearance 140 mm (5.5 inches) 
Trail size 141 mm (5.6 inches) 
Wheels details Black cast wheels 
Front Tyres - Rims dimensions 130/90-16 
Rear Tyres - Rims dimensions 170/80-15 
Front brakes Single disc. Hydraulic 
Rear brakes Expanding brake (drum brake) 
Front Brakes Dimensions - Disc Dimensions  
Rear Brakes Dimensions - Disc Dimensions  
Curb Weight (including fluids) 295.0 kg (650.4 pounds) 
Dry Weight 276.0 kg (608.5 pounds) 
Front Percentage of Weight  
Rear Percentage of Weight  
Weight-Power Output Ratio : 0.1196 HP/kg 
Fuel Tank Capacity 15.00 litres (3.96 gallons) 
Reserve Fuel Capacity  
Carrying Details and Capacity  
Front Suspension  
Front Suspension Travel  
Rear Suspension  
Rear Suspension Travel  

Suzuki Intruder Classic 400 Cast Wheel Engine and Transmission Technical Data

Engine type - Number of cylinders V2, four-stroke 
Engine details  
Fuel system Injection 
Engine size - Displacement - Engine capacity 399.00 ccm (24.35 cubic inches) 
Bore x Stroke 65.0 x 60.2 mm (2.6 x 2.4 inches) 
Compression Ratio  
Number of valves per cylinder
Camshaft Valvetrain Configuration SOHC 
Maximum power - Output - Horsepower 33.00 HP (24.1 kW) @ 8000 RPM 
Maximum torque 33.00 Nm (3.4 kgf-m or 24.3 ft.lbs) @ 6000 RPM 
Engine Maximum RPM  
Cooling system Oil & air 
Lubrication system Wet sump 
Engine oil capacity 3.70 litres (0.24 quarts) 
Exhaust system  
Gearbox 5-speed 
Transmission type, final drive ratio Chain 
Clutch type Wet multi-plate coil spring 
Driveline Constant mesh 

Suzuki Intruder Classic 400 Cast Wheel Performance

Top Speed  
Acceleration 0 to 100 km/h (0 to 62 mph)  
Acceleration 0 to 400m (1/4 mile)  
Recuperation 60 to 140 km/h in highest gear  
Fuel Consumption - MPG - Economy - Efficiency 3.03 litres/100 km (33.0 km/l or 77.63 mpg) 
CO2 emissions 70.3 CO2 g/km. (CO2 - Carbon dioxide emission) 
Emissions  

Suzuki Intruder Classic 400 Cast Wheel Electrical Systems, Ignition and Equipment

Ignition Type Full transistor type 
Electrical Details  
Starter Type Electric 
Instruments Digital/analogue 
Lights