Motorcycles Specs > Sherco > Sherco 250 ST



Sherco 250 ST Specs

(2014)
The Sherco 250 ST model is a Trial bike manufactured by Sherco . In this version sold from year 2014 , the dry weight is 68.0 kg (149.9 pounds) and it is equipped with a Single cylinder, two-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Sherco 250 ST is capable of reaching a maximum top speed of  . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Sherco 250 ST has a Tubular section chrome-moly frame with front suspension being Tech Ø 39 mm hydraulic telescopic fork and at the rear, it is equipped with Progressive link system with single Olle adjustable shock absorber. . Stock tire sizes are  on the front, and  on the rear. As for stopping power, the Sherco 250 ST braking system includes Single disc. Hydraulically activated Formula floating disc size 185 mm (7.3 inches) at the front and Single disc. Hydraulically activated Formula floating disc size 145 mm (5.7 inches) at the back. 

Sherco 250 ST General Information

Brand Sherco 
Model Sherco 250 ST 
Start year 2014 
Year 2014 
Category Trial 
Factory Warranty (Years / miles)

Sherco 250 ST Dimensions, Aerodynamics and weight

Frame type Tubular section chrome-moly 
Seat details
Wheelbase 1,322 mm (52.0 inches) 
Length
Width
Height
Seat Height 645 mm (25.4 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance 305 mm (12.0 inches) 
Trail size
Wheels details Morad graphit anodized aluminum rim and aluminum hub, steel spokes with Michelin tube-type tire 
Front Tyres - Rims dimensions
Rear Tyres - Rims dimensions
Front brakes Single disc. Hydraulically activated Formula floating disc 
Rear brakes Single disc. Hydraulically activated Formula floating disc 
Front Brakes Dimensions - Disc Dimensions 185 mm (7.3 inches) 
Rear Brakes Dimensions - Disc Dimensions 145 mm (5.7 inches) 
Curb Weight (including fluids)
Dry Weight 68.0 kg (149.9 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 2.90 litres (0.77 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension Tech Ø 39 mm hydraulic telescopic fork 
Front Suspension Travel 165 mm (6.5 inches) 
Rear Suspension Progressive link system with single Olle adjustable shock absorber. 
Rear Suspension Travel 175 mm (6.9 inches) 

Sherco 250 ST Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, two-stroke 
Engine details Nikasil coated cylinder 
Fuel system Carburettor. Dell´Orto PHBL26BS 
Engine size - Displacement - Engine capacity 249.70 ccm (15.24 cubic inches) 
Bore x Stroke 72.8 x 60.0 mm (2.9 x 2.4 inches) 
Compression Ratio
Number of valves per cylinder
Camshaft Valvetrain Configuration
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM
Cooling system
Lubrication system 2% oil mixture 
Engine oil capacity
Exhaust system Steel header pipe with an integrated aluminum muffler 
Gearbox 5-speed 
Transmission type, final drive ratio Chain 
Clutch type Hydraulically activated multidisc in oil bath 
Driveline Sequential gearbox with security selector system to prevent false shifts. Primary gear drive chain secondary drive 

Sherco 250 ST Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Sherco 250 ST Electrical Systems, Ignition and Equipment

Ignition Type Digital Hidria with two power curves 
Electrical Details
Starter Type Kick 
Instruments
Lights
How much does a Sherco 250 ST weighs?
The Sherco 250 ST weighs 68.0 kg (149.9 pounds).

How tall (seat height) is a Sherco 250 ST?
The Sherco 250 ST seat height is 645 mm (25.4 inches) If adjustable, lowest setting.

How many gears does a Sherco 250 ST have?
The Sherco 250 ST have 5 gears.