Sherco 250 SE-R Factory Specs
(2016)
Sherco 250 SE-R Factory General Information |
|
| Brand | Sherco |
| Model | Sherco 250 SE-R Factory |
| Start year | 2016 |
| Year | 2016 |
| Category | Enduro / offroad |
| Factory Warranty (Years / miles) | - |
Sherco 250 SE-R Factory Dimensions, Aerodynamics and weight |
|
| Frame type | High strength Chrome-Molybdenum steel semi-perimeter |
| Seat details | - |
| Wheelbase | 1,480 mm (58.3 inches) |
| Length | - |
| Width | - |
| Height | - |
| Seat Height | 950 mm (37.4 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | 355 mm (14.0 inches) |
| Trail size | - |
| Wheels details | Blue Anodized Rims |
| Front Tyres - Rims dimensions | 1.60-21 |
| Rear Tyres - Rims dimensions | 2.15-18 |
| Front brakes | Single disc. Brembo |
| Rear brakes | Single disc. Brembo |
| Front Brakes Dimensions - Disc Dimensions | 260 mm (10.2 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 220 mm (8.7 inches) |
| Curb Weight (including fluids) | - |
| Dry Weight | 105.0 kg (231.5 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | - |
| Fuel Tank Capacity | 9.50 litres (2.51 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | WP closed cartridge 4860 MXMA fork |
| Front Suspension Travel | 300 mm (11.8 inches) |
| Rear Suspension | WP Monoshock progressive rear suspension with aluminum control rods, adjustable for high and low speed compression and spring pre-load. |
| Rear Suspension Travel | 330 mm (13.0 inches) |
Sherco 250 SE-R Factory Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | Single cylinder, two-stroke |
| Engine details | - |
| Fuel system | Carburettor. Keihin PWK 36 |
| Engine size - Displacement - Engine capacity | 249.30 ccm (15.21 cubic inches) |
| Bore x Stroke | 66.4 x 72.0 mm (2.6 x 2.8 inches) |
| Compression Ratio | - |
| Number of valves per cylinder | 4 |
| Camshaft Valvetrain Configuration | - |
| Maximum power - Output - Horsepower | - |
| Maximum torque | - |
| Engine Maximum RPM | 13500 |
| Cooling system | Liquid |
| Lubrication system | Dry sump |
| Engine oil capacity | - |
| Exhaust system | FMF Racing Exhaust |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Hydraulic, multidisc in oil bath |
| Driveline | Gears in primary drive secondary drive with chain |
Sherco 250 SE-R Factory Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
Sherco 250 SE-R Factory Electrical Systems, Ignition and Equipment |
|
| Ignition Type | Kokusan DC - CDI ignition with digital advance |
| Electrical Details | 12 V / 4Ah Yuasa. Ducati Energia alternator 150 W. |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much does a Sherco 250 SE-R Factory weighs?
The Sherco 250 SE-R Factory weighs 105.0 kg (231.5 pounds).
How tall (seat height) is a Sherco 250 SE-R Factory?
The Sherco 250 SE-R Factory seat height is 950 mm (37.4 inches) If adjustable, lowest setting.
How many gears does a Sherco 250 SE-R Factory has?
The Sherco 250 SE-R Factory has 6 gears.
The Sherco 250 SE-R Factory weighs 105.0 kg (231.5 pounds).
How tall (seat height) is a Sherco 250 SE-R Factory?
The Sherco 250 SE-R Factory seat height is 950 mm (37.4 inches) If adjustable, lowest setting.
How many gears does a Sherco 250 SE-R Factory has?
The Sherco 250 SE-R Factory has 6 gears.