English Français Deutsch Svensk Português PT Español русский Italiano 中文 български Nederlands Polski Português BR Türkçe
UltimateSpecs.com   Cars Motorcycles
Motorcycles Specs > Sherco > Sherco 250 SE-R

Sherco 250 SE-R Specs

The Sherco 250 SE-R model is a Enduro / offroad bike manufactured by Sherco . In this version sold from year 2017 , the dry weight is 105.0 kg (231.5 pounds) and it is equiped with a Single cylinder, two-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Sherco 250 SE-R is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Sherco 250 SE-R have a High strength Chrome-Molybdenum steel semi-perimeter frame with front suspension being WP hydraulic telescopic adjustable compression and rebound and in the rear suspension it is equiped with WP Monoshock progressive rear uspension with aluminum control rods, adjustable for high and low speed compression and spring pre-load. 330 mm ( . Stock tire sizes are 1.60-21 on the front, and 2.15-18 on the rear. As for stopping power, the Sherco 250 SE-R braking system includes Single disc. Brembo size 260 mm (10.2 inches) at the front and Single disc. Brembo size 220 mm (8.7 inches) at the rear. 

Sherco 250 SE-R General Information

Brand Sherco 
Model Sherco 250 SE-R 
Year 2017 
Year 2017 
Category Enduro / offroad 
Factory Warranty (Years / miles)  

Sherco 250 SE-R Dimensions, Aerodynamics and weight

Frame type High strength Chrome-Molybdenum steel semi-perimeter 
Seat details  
Wheelbase 1,480 mm (58.3 inches) 
Length  
Width  
Height  
Seat Height 950 mm (37.4 inches) If adjustable, lowest setting. 
Alternate Seat Height  
Ground Clearance 355 mm (14.0 inches) 
Trail size  
Wheels details Aluminum rim with Michelin Enduro Competition tube-type tire 
Front Tyres - Rims dimensions 1.60-21 
Rear Tyres - Rims dimensions 2.15-18 
Front brakes Single disc. Brembo 
Rear brakes Single disc. Brembo 
Front Brakes Dimensions - Disc Dimensions 260 mm (10.2 inches) 
Rear Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Curb Weight (including fluids)  
Dry Weight 105.0 kg (231.5 pounds) 
Front Percentage of Weight  
Rear Percentage of Weight  
Weight-Power Output Ratio :  
Fuel Tank Capacity 10.40 litres (2.75 gallons) 
Reserve Fuel Capacity  
Carrying Details and Capacity  
Front Suspension WP hydraulic telescopic adjustable compression and rebound 
Front Suspension Travel 300 mm (11.8 inches) 
Rear Suspension WP Monoshock progressive rear uspension with aluminum control rods, adjustable for high and low speed compression and spring pre-load. 330 mm ( 
Rear Suspension Travel 330 mm (13.0 inches) 

Sherco 250 SE-R Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, two-stroke 
Engine details  
Fuel system Carburettor. Keihin PWK 36 
Engine size - Displacement - Engine capacity 249.30 ccm (15.21 cubic inches) 
Bore x Stroke 66.4 x 72.0 mm (2.6 x 2.8 inches) 
Compression Ratio  
Number of valves per cylinder  
Camshaft Valvetrain Configuration  
Maximum power - Output - Horsepower  
Maximum torque  
Engine Maximum RPM  
Cooling system Liquid 
Lubrication system  
Engine oil capacity  
Exhaust system  
Gearbox 6-speed 
Transmission type, final drive ratio Chain 
Clutch type Hydraulic, multidisc in oil bath 
Driveline Gears in primary drive secondary drive with chain 

Sherco 250 SE-R Performance

Top Speed  
Acceleration 0 to 100 km/h (0 to 62 mph)  
Acceleration 0 to 400m (1/4 mile)  
Recuperation 60 to 140 km/h in highest gear  
Fuel Consumption - MPG - Economy - Efficiency  
CO2 emissions  
Emissions  

Sherco 250 SE-R Electrical Systems, Ignition and Equipment

Ignition Type DC - CDI ignition with digital advance 
Electrical Details 12 V 4Ah Yuasa battery. 
Starter Type Electric 
Instruments  
Lights