Motorcycles Specs > Rieju > Rieju MRT Replica

Rieju MRT Replica Specs

(2019)
The Rieju MRT Replica model is a Enduro / offroad bike manufactured by Rieju . In this version sold from year 2019 , the dry weight is 85.0 kg (187.4 pounds) and it is equipped with a Single cylinder, two-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Rieju MRT Replica is capable of reaching a maximum top speed of  . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Rieju MRT Replica has a Highly resistant double cradle steel perimeter. Detachable rear sub-chassis. frame with front suspension being  and at the rear, it is equipped with  . Stock tire sizes are 80/90-21 on the front, and 110/80-18 on the rear. As for stopping power, the Rieju MRT Replica braking system includes Single disc. Galfer wave disc with double piston caliper size 300 mm (11.8 inches) at the front and Single disc. Galfer Wave size 200 mm (7.9 inches) at the back. 

Rieju MRT Replica General Information

Brand Rieju 
Model Rieju MRT Replica 
Start year 2019 
Year 2019 
Category Enduro / offroad 
Factory Warranty (Years / miles)

Rieju MRT Replica Dimensions, Aerodynamics and weight

Frame type Highly resistant double cradle steel perimeter. Detachable rear sub-chassis. 
Seat details
Wheelbase 1,405 mm (55.3 inches) 
Length 2,150 mm (84.6 inches) 
Width 800 mm (31.5 inches) 
Height 1,165 mm (45.9 inches) 
Seat Height 890 mm (35.0 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size
Wheels details
Front Tyres - Rims dimensions 80/90-21 
Rear Tyres - Rims dimensions 110/80-18 
Front brakes Single disc. Galfer wave disc with double piston caliper 
Rear brakes Single disc. Galfer Wave 
Front Brakes Dimensions - Disc Dimensions 300 mm (11.8 inches) 
Rear Brakes Dimensions - Disc Dimensions 200 mm (7.9 inches) 
Curb Weight (including fluids)
Dry Weight 85.0 kg (187.4 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 6.32 litres (1.67 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension
Front Suspension Travel
Rear Suspension
Rear Suspension Travel

Rieju MRT Replica Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, two-stroke 
Engine details
Fuel system Carburettor. DellOrto 
Engine size - Displacement - Engine capacity 50.00 ccm (3.05 cubic inches) 
Bore x Stroke 40.3 x 39.0 mm (1.6 x 1.5 inches) 
Compression Ratio
Number of valves per cylinder
Camshaft Valvetrain Configuration
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM
Cooling system Liquid 
Lubrication system
Engine oil capacity
Exhaust system
Gearbox
Transmission type, final drive ratio
Clutch type
Driveline

Rieju MRT Replica Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Rieju MRT Replica Electrical Systems, Ignition and Equipment

Ignition Type
Electrical Details
Starter Type Kick 
Instruments
Lights
How much does a Rieju MRT Replica weighs?
The Rieju MRT Replica weighs 85.0 kg (187.4 pounds).

How tall (seat height) is a Rieju MRT Replica?
The Rieju MRT Replica seat height is 890 mm (35.0 inches) If adjustable, lowest setting.