NCR Leggera Specs
(2019)
NCR Leggera General Information |
|
| Brand | NCR |
| Model | NCR Leggera |
| Start year | 2019 |
| Year | 2019 |
| Category | Super motard |
| Factory Warranty (Years / miles) | - |
NCR Leggera Dimensions, Aerodynamics and weight |
|
| Frame type | Trellis frame made entirely of Grade 9 Titanium. |
| Seat details | - |
| Wheelbase | 1,400 mm (55.1 inches) |
| Length | - |
| Width | - |
| Height | - |
| Seat Height | - |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | - |
| Wheels details | Carbon fiber wheels from BST |
| Front Tyres - Rims dimensions | 120/70-R17 |
| Rear Tyres - Rims dimensions | 180/55-R17 |
| Front brakes | Double disc. WAVE rotors, radial monoblock Brembo Racing calipers with 4 pistons and 2 pads. |
| Rear brakes | Single disc. WAVE rotor, Brembo 2 piston caliper |
| Front Brakes Dimensions - Disc Dimensions | 300 mm (11.8 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 200 mm (7.9 inches) |
| Curb Weight (including fluids) | - |
| Dry Weight | 157.0 kg (346.1 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.5732 HP/kg |
| Fuel Tank Capacity | - |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Ohlins titanium nitride coated 46mm full adjustable with NCR Corse valving, adjustable offset NCR triple clamps made in avionic aluminum. NCR Corse billet fork bottoms |
| Front Suspension Travel | - |
| Rear Suspension | NCR- Ohlins monoshock, fully adjustable including low and high speed circuits and configured by NCR CORSE |
| Rear Suspension Travel | - |
NCR Leggera Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | V2, four-stroke |
| Engine details | Ducati DS 1100 engine. Optional 125 HP bore. |
| Fuel system | Injection. Magneti Marelli, 45mm throttle bodies. |
| Engine size - Displacement - Engine capacity | 1100.00 ccm (67.12 cubic inches) |
| Bore x Stroke | - |
| Compression Ratio | - |
| Number of valves per cylinder | 2 |
| Camshaft Valvetrain Configuration | Desmodromic valve control |
| Maximum power - Output - Horsepower | 90.00 HP (65.7 kW)) @ 7750 RPM |
| Maximum torque | - |
| Engine Maximum RPM | - |
| Cooling system | Oil & air |
| Lubrication system | - |
| Engine oil capacity | - |
| Exhaust system | Full exhaust 2 into 1 into 2 configuration with catalitic converter and lambda system. Exhaust is in titanium and the mufflers are in carbon. Design by NCR and built by Zard, the silencers are 45% lighter than stock. |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | - |
| Driveline | - |
NCR Leggera Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
NCR Leggera Electrical Systems, Ignition and Equipment |
|
| Ignition Type | - |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much horsepower does a NCR Leggera has?
The NCR Leggera has 90.00 HP (65.7 kW)) @ 7750 RPM.
How much does a NCR Leggera weighs?
The NCR Leggera weighs 157.0 kg (346.1 pounds).
How many gears does a NCR Leggera has?
The NCR Leggera has 6 gears.
The NCR Leggera has 90.00 HP (65.7 kW)) @ 7750 RPM.
How much does a NCR Leggera weighs?
The NCR Leggera weighs 157.0 kg (346.1 pounds).
How many gears does a NCR Leggera has?
The NCR Leggera has 6 gears.