Motorcycles Specs > Honda > Honda SH300i

Honda SH300i Specs

(2012)
The Honda SH300i model is a Scooter bike manufactured by Honda . In this version sold from year 2012 , the dry weight is 161.8 kg (356.7 pounds) and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 26.82 HP (19.6 kW) @ 8250 RPM and a maximum torque of 26.00 Nm (2.7 kgf-m or 19.2 ft.lbs) @ 6000 RPM . With this drive-train, the Honda SH300i is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Honda SH300i have a  frame with front suspension being 35mm telescopic fork and in the rear suspension it is equiped with Dual-damper unit swingarm . Stock tire sizes are 110/70-(16 on the front, and 130/70-(16 on the rear. As for stopping power, the Honda SH300i braking system includes Single disc. Triple-piston calliper, drilled rotor (ABS) and sintered metal pads size 256 mm (10.1 inches) at the front and Single disc. Single-piston calliper, drilled rotor (ABS) and sintered metal pads size 256 mm (10.1 inches) at the rear. 

Honda SH300i General Information

Brand Honda 
Model Honda SH300i 
Start year 2012 
Year 2012 
Category Scooter 
Factory Warranty (Years / miles)

Honda SH300i Dimensions, Aerodynamics and weight

Frame type
Seat details
Wheelbase 1,420 mm (55.9 inches) 
Length 2,100 mm (82.7 inches) 
Width 730 mm (28.7 inches) 
Height 1,220 mm (48.0 inches) 
Seat Height 785 mm (30.9 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size
Wheels details U-section 6-spoke cast aluminium,16 x MT2.75 
Front Tyres - Rims dimensions 110/70-(16 
Rear Tyres - Rims dimensions 130/70-(16 
Front brakes Single disc. Triple-piston calliper, drilled rotor (ABS) and sintered metal pads 
Rear brakes Single disc. Single-piston calliper, drilled rotor (ABS) and sintered metal pads 
Front Brakes Dimensions - Disc Dimensions 256 mm (10.1 inches) 
Rear Brakes Dimensions - Disc Dimensions 256 mm (10.1 inches) 
Curb Weight (including fluids)
Dry Weight 161.8 kg (356.7 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio : 0.1658 HP/kg 
Fuel Tank Capacity 9.00 litres (2.38 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension 35mm telescopic fork 
Front Suspension Travel 102 mm (4.0 inches) 
Rear Suspension Dual-damper unit swingarm 
Rear Suspension Travel 95 mm (3.7 inches) 

Honda SH300i Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Injection. PGM-FI 
Engine size - Displacement - Engine capacity 279.10 ccm (17.03 cubic inches) 
Bore x Stroke 72.0 x 68.5 mm (2.8 x 2.7 inches) 
Compression Ratio 10.5:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration SOHC 
Maximum power - Output - Horsepower 26.82 HP (19.6 kW) @ 8250 RPM 
Maximum torque 26.00 Nm (2.7 kgf-m or 19.2 ft.lbs) @ 6000 RPM 
Engine Maximum RPM
Cooling system Liquid 
Lubrication system
Engine oil capacity
Exhaust system
Gearbox Automatic 
Transmission type, final drive ratio Belt 
Clutch type
Driveline V-matic 

Honda SH300i Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Honda SH300i Electrical Systems, Ignition and Equipment

Ignition Type
Electrical Details
Starter Type Electric 
Instruments
Lights
How much horsepower does a Honda SH300i have?
The Honda SH300i has 26.82 HP (19.6 kW) @ 8250 RPM.

How much does a Honda SH300i weighs?
The Honda SH300i weighs 161.8 kg (356.7 pounds).

How tall (seat height) is a Honda SH300i?
The Honda SH300i seat height is 785 mm (30.9 inches) If adjustable, lowest setting.