Motorcycles Specs > Honda > Honda SH150i

Honda SH150i Specs

(2013)
The Honda SH150i model is a Scooter bike manufactured by Honda . In this version sold from year 2013 , the dry weight is  and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Honda SH150i is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Honda SH150i have a  frame with front suspension being 33mm hydraulic fork and in the rear suspension it is equiped with Swingarm with dual hydraulic shocks, spring-preload adjustability . Stock tire sizes are 100/80-16 on the front, and 120/80-16 on the rear. As for stopping power, the Honda SH150i braking system includes Single disc. Two-piston calipers. size 220 mm (8.7 inches) at the front and Expanding brake (drum brake) size 130 mm (5.1 inches) at the rear. 

Honda SH150i General Information

Brand Honda 
Model Honda SH150i 
Start year 2013 
Year 2013 
Category Scooter 
Factory Warranty (Years / miles) One year. Unlimited milage. Transferable. 

Honda SH150i Dimensions, Aerodynamics and weight

Frame type
Seat details
Wheelbase 1,356 mm (53.4 inches) 
Length
Width
Height
Seat Height 785 mm (30.9 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size
Wheels details
Front Tyres - Rims dimensions 100/80-16 
Rear Tyres - Rims dimensions 120/80-16 
Front brakes Single disc. Two-piston calipers. 
Rear brakes Expanding brake (drum brake) 
Front Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Rear Brakes Dimensions - Disc Dimensions 130 mm (5.1 inches) 
Curb Weight (including fluids) 137.0 kg (302.0 pounds) 
Dry Weight
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 6.81 litres (1.80 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension 33mm hydraulic fork 
Front Suspension Travel 89 mm (3.5 inches) 
Rear Suspension Swingarm with dual hydraulic shocks, spring-preload adjustability 
Rear Suspension Travel 84 mm (3.3 inches) 

Honda SH150i Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Injection. Programmed Fuel Injection (PGM-FI) with automatic enricher circuit 
Engine size - Displacement - Engine capacity 153.00 ccm (9.34 cubic inches) 
Bore x Stroke 58.0 x 57.8 mm (2.3 x 2.3 inches) 
Compression Ratio 11.0:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration SOHC 
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM
Cooling system Liquid 
Lubrication system
Engine oil capacity
Exhaust system
Gearbox Automatic 
Transmission type, final drive ratio Belt 
Clutch type
Driveline

Honda SH150i Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency 2.58 litres/100 km (38.8 km/l or 91.17 mpg) 
CO2 emissions 59.9 CO2 g/km. (CO2 - Carbon dioxide emission) 
Emissions Meets current California Air Resources Board (CARB) and EPA standards. 

Honda SH150i Electrical Systems, Ignition and Equipment

Ignition Type Digital transistorized with electronic advance 
Electrical Details
Starter Type
Instruments
Lights