English Français Deutsch Svensk Português PT Español русский Italiano 中文 български Nederlands Polski Português BR Türkçe
UltimateSpecs.com   Cars Motorcycles
Motorcycles Specs > Honda > Honda Lead 110

Honda Lead 110 Specs

The Honda Lead 110 model is a Scooter bike manufactured by Honda . In this version sold from year 2012 , the dry weight is 114.0 kg (251.3 pounds) and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 8.85 HP (6.5 kW) @ 7500 RPM and a maximum torque of 9.30 Nm (0.9 kgf-m or 6.9 ft.lbs) @ 6250 RPM . With this drive-train, the Honda Lead 110 is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Honda Lead 110 have a  frame with front suspension being  and in the rear suspension it is equiped with  . Stock tire sizes are 90/90-M12 on the front, and 100/90-M10 on the rear. As for stopping power, the Honda Lead 110 braking system includes Single disc. Combined dual-piston calliper, drilled rotor and resin mould pads size 190 mm (7.5 inches) at the front and Expanding brake (drum brake) size 130 mm (5.1 inches) at the rear. 

Honda Lead 110 General Information

Brand Honda 
Model Honda Lead 110 
Year 2012 
Year 2012 
Category Scooter 
Factory Warranty (Years / miles)  

Honda Lead 110 Dimensions, Aerodynamics and weight

Frame type  
Seat details 2-person seat 
Wheelbase 1,275 mm (50.2 inches) 
Length 1,835 mm (72.2 inches) 
Width  
Height 1,125 mm (44.3 inches) 
Seat Height 740 mm (29.1 inches) If adjustable, lowest setting. 
Alternate Seat Height  
Ground Clearance 105 mm (4.1 inches) 
Trail size  
Wheels details U-section 5-spoke cast aluminium 
Front Tyres - Rims dimensions 90/90-M12 
Rear Tyres - Rims dimensions 100/90-M10 
Front brakes Single disc. Combined dual-piston calliper, drilled rotor and resin mould pads 
Rear brakes Expanding brake (drum brake) 
Front Brakes Dimensions - Disc Dimensions 190 mm (7.5 inches) 
Rear Brakes Dimensions - Disc Dimensions 130 mm (5.1 inches) 
Curb Weight (including fluids) 120.0 kg (264.6 pounds) 
Dry Weight 114.0 kg (251.3 pounds) 
Front Percentage of Weight  
Rear Percentage of Weight  
Weight-Power Output Ratio : 0.0776 HP/kg 
Fuel Tank Capacity 6.50 litres (1.72 gallons) 
Reserve Fuel Capacity  
Carrying Details and Capacity  
Front Suspension  
Front Suspension Travel 70 mm (2.8 inches) 
Rear Suspension  
Rear Suspension Travel 80 mm (3.1 inches) 

Honda Lead 110 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details  
Fuel system Injection. PGM-FI 
Engine size - Displacement - Engine capacity 107.00 ccm (6.53 cubic inches) 
Bore x Stroke 50.0 x 55.0 mm (2.0 x 2.2 inches) 
Compression Ratio 11.0:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration SOHC 
Maximum power - Output - Horsepower 8.85 HP (6.5 kW) @ 7500 RPM 
Maximum torque 9.30 Nm (0.9 kgf-m or 6.9 ft.lbs) @ 6250 RPM 
Engine Maximum RPM  
Cooling system Liquid 
Lubrication system  
Engine oil capacity  
Exhaust system  
Gearbox Automatic 
Transmission type, final drive ratio Belt 
Clutch type  
Driveline V-matic 

Honda Lead 110 Performance

Top Speed  
Acceleration 0 to 100 km/h (0 to 62 mph)  
Acceleration 0 to 400m (1/4 mile)  
Recuperation 60 to 140 km/h in highest gear  
Fuel Consumption - MPG - Economy - Efficiency  
CO2 emissions  
Emissions  

Honda Lead 110 Electrical Systems, Ignition and Equipment

Ignition Type  
Electrical Details  
Starter Type Electric 
Instruments  
Lights