Motorcycles Specs > Honda > Honda Fury



Honda Fury Specs

(2012)
Blank image
The Honda Fury model is a Custom / cruiser bike manufactured by Honda . In this version sold from year 2012 , the dry weight is and it is equipped with a V2, four-stroke motor. The engine produces a maximum peak output power of and a maximum torque of 89.50 Nm (9.1 kgf-m or 66.0 ft.lbs) . With this drive-train, the Honda Fury is capable of reaching a maximum top speed of . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Honda Fury has a frame with front suspension being 45mm fork and at the rear, it is equipped with Single shock with adjustable rebound-damping and five-position spring-preload adjustability . Stock tire sizes are on the front, and 200/50-18 on the rear. As for stopping power, the Honda Fury braking system includes Single disc. Twin-piston caliper size 336 mm (13.2 inches) at the front and Single disc size 296 mm (11.7 inches) at the back.

Honda Fury General Information

Brand Honda 
Model Honda Fury 
Start year 2012 
Year 2012 
Category Custom / cruiser 
Factory Warranty (Years / miles) One year. Unlimited milage. Transferable. 

Honda Fury Dimensions, Aerodynamics and weight

Frame type
Seat details
Wheelbase 1,808 mm (71.2 inches) 
Length
Width
Height
Seat Height 683 mm (26.9 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size 92 mm (3.6 inches) 
Wheels details
Front Tyres - Rims dimensions
Rear Tyres - Rims dimensions 200/50-18 
Front brakes Single disc. Twin-piston caliper 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 336 mm (13.2 inches) 
Rear Brakes Dimensions - Disc Dimensions 296 mm (11.7 inches) 
Curb Weight (including fluids) 300.7 kg (663.0 pounds) 
Dry Weight
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 12.87 litres (3.40 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension 45mm fork 
Front Suspension Travel 102 mm (4.0 inches) 
Rear Suspension Single shock with adjustable rebound-damping and five-position spring-preload adjustability 
Rear Suspension Travel 94 mm (3.7 inches) 

Honda Fury Engine and Transmission Technical Data

Engine type - Number of cylinders V2, four-stroke 
Engine details
Fuel system Injection. PGM-FI with automatic enricher circuit, one 38mm throttle body 
Engine size - Displacement - Engine capacity 1312.00 ccm (80.06 cubic inches) 
Bore x Stroke 89.5 x 104.3 mm (3.5 x 4.1 inches) 
Compression Ratio 9.2:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration SOHC 
Maximum power - Output - Horsepower
Maximum torque 89.50 Nm (9.1 kgf-m or 66.0 ft.lbs) 
Engine Maximum RPM
Cooling system Liquid 
Lubrication system
Engine oil capacity
Exhaust system
Gearbox 5-speed 
Transmission type, final drive ratio Shaft drive (cardan) 
Clutch type
Driveline

Honda Fury Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency 5.23 litres/100 km (19.1 km/l or 44.98 mpg) 
CO2 emissions 121.3 CO2 g/km. (CO2 - Carbon dioxide emission) 
Emissions Meets current EPA standards. California version meets current California Air Resources Board (CARB) standards and may differ slightly due to emissions equipment 

Honda Fury Electrical Systems, Ignition and Equipment

Ignition Type Digital with three-dimensional mapping, two spark plugs per cylinder 
Electrical Details
Starter Type Electric 
Instruments
Lights
How tall (seat height) is a Honda Fury?
The Honda Fury seat height is 683 mm (26.9 inches) If adjustable, lowest setting.

How many gears does a Honda Fury have?
The Honda Fury have 5 gears.