Honda CRF250X Specs
(2018)
Honda CRF250X General Information |
|
| Brand | Honda |
| Model | Honda CRF250X |
| Start year | 2018 |
| Year | 2018 |
| Category | Enduro / offroad |
| Factory Warranty (Years / miles) | - |
Honda CRF250X Dimensions, Aerodynamics and weight |
|
| Frame type | Semi-double cradle, aluminium twin-spar |
| Seat details | - |
| Wheelbase | 1,481 mm (58.3 inches) |
| Length | 2,174 mm (85.6 inches) |
| Width | 827 mm (32.6 inches) |
| Height | 1,261 mm (49.6 inches) |
| Seat Height | 958 mm (37.7 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | 345 mm (13.6 inches) |
| Trail size | 118 mm (4.6 inches) |
| Wheels details | Aluminium rim/wire spoke |
| Front Tyres - Rims dimensions | 80/100-21 |
| Rear Tyres - Rims dimensions | 100/100-18 |
| Front brakes | Single disc. Two-piston calipers. |
| Rear brakes | Single disc |
| Front Brakes Dimensions - Disc Dimensions | 240 mm (9.4 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 240 mm (9.4 inches) |
| Curb Weight (including fluids) | 115.2 kg (254.0 pounds) |
| Dry Weight | - |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | - |
| Fuel Tank Capacity | 7.19 litres (1.90 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | 47mm inverted Showa® cartridge fork with 16-position rebound- and 16-position compression-damping adjustability; 12.4-inches travel |
| Front Suspension Travel | 315 mm (12.4 inches) |
| Rear Suspension | Pro-Link® Showa® single shock with spring-preload, 17-position rebound-damping adjustability, and compression damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.3 inches travel |
| Rear Suspension Travel | 312 mm (12.3 inches) |
Honda CRF250X Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | Single cylinder, four-stroke |
| Engine details | 31mm intake valve, 26mm exhaust valve |
| Fuel system | Carburettor. Keihin® 37mm flat-slide carburetor with Throttle Position Sensor (TPS) |
| Engine size - Displacement - Engine capacity | 249.00 ccm (15.19 cubic inches) |
| Bore x Stroke | 78.0 x 52.2 mm (3.1 x 2.1 inches) |
| Compression Ratio | 12.9:1 |
| Number of valves per cylinder | 4 |
| Camshaft Valvetrain Configuration | Single Overhead Cams (SOHC) |
| Maximum power - Output - Horsepower | 29.37 HP (21.4 kW)) @ 9000 RPM |
| Maximum torque | 24.20 Nm (2.5 kgf-m or 17.8 ft.lbs) @ 8000 RPM |
| Engine Maximum RPM | - |
| Cooling system | Liquid |
| Lubrication system | Twin-sump lubrication |
| Engine oil capacity | - |
| Exhaust system | - |
| Gearbox | 5-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | - |
| Driveline | #520 T-ring-sealed chain; 14T/53T |
Honda CRF250X Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | Meets current California Air Resource Board (CARB) and EPA off-road emissions standards. |
Honda CRF250X Electrical Systems, Ignition and Equipment |
|
| Ignition Type | CD with electronic advance and lighting coil |
| Electrical Details | - |
| Starter Type | Electric & kick |
| Instruments | - |
| Lights | - |
How much horsepower does a Honda CRF250X has?
The Honda CRF250X has 29.37 HP (21.4 kW)) @ 9000 RPM.
How tall (seat height) is a Honda CRF250X?
The Honda CRF250X seat height is 958 mm (37.7 inches) If adjustable, lowest setting.
How many gears does a Honda CRF250X has?
The Honda CRF250X has 5 gears.
The Honda CRF250X has 29.37 HP (21.4 kW)) @ 9000 RPM.
How tall (seat height) is a Honda CRF250X?
The Honda CRF250X seat height is 958 mm (37.7 inches) If adjustable, lowest setting.
How many gears does a Honda CRF250X has?
The Honda CRF250X has 5 gears.