Motorcycles Specs > Honda > Honda CRF250L

Honda CRF250L Specs

The Honda CRF250L model is a Enduro / offroad bike manufactured by Honda . In this version sold from year 2013 , the dry weight is  and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 22.80 HP (16.6 kW) @ 8500 RPM and a maximum torque of 22.00 Nm (2.2 kgf-m or 16.2 ft.lbs) @ 7000 RPM . With this drive-train, the Honda CRF250L is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Honda CRF250L have a Semi-double cradle. Swing arm: Rear wheel travel. frame with front suspension being Telescopic (Inverted) 43mm diameter slide pipe and in the rear suspension it is equiped with Swing arm (Pro-link suspension system) 40mm diameter cylinder . Stock tire sizes are 3.00-21 on the front, and 120/80-P18 on the rear. As for stopping power, the Honda CRF250L braking system includes Single disc. Hydraulic. Two-piston calipers. size 256 mm (10.1 inches) at the front and Single disc. Hydraulic. Single-piston caliper. size 220 mm (8.7 inches) at the rear. 

Honda CRF250L General Information

Brand Honda 
Model Honda CRF250L 
Start year 2013 
Year 2013 
Category Enduro / offroad 
Factory Warranty (Years / miles)

Honda CRF250L Dimensions, Aerodynamics and weight

Frame type Semi-double cradle. Swing arm: Rear wheel travel. 
Seat details
Wheelbase 1,445 mm (56.9 inches) 
Length 2,195 mm (86.4 inches) 
Width 815 mm (32.1 inches) 
Height 1,195 mm (47.0 inches) 
Seat Height 875 mm (34.4 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance 255 mm (10.0 inches) 
Trail size 113 mm (4.4 inches) 
Wheels details Brakes Front 
Front Tyres - Rims dimensions 3.00-21 
Rear Tyres - Rims dimensions 120/80-P18 
Front brakes Single disc. Hydraulic. Two-piston calipers. 
Rear brakes Single disc. Hydraulic. Single-piston caliper. 
Front Brakes Dimensions - Disc Dimensions 256 mm (10.1 inches) 
Rear Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Curb Weight (including fluids) 144.0 kg (317.5 pounds) 
Dry Weight
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 7.70 litres (2.03 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension Telescopic (Inverted) 43mm diameter slide pipe 
Front Suspension Travel 61 mm (2.4 inches) 
Rear Suspension Swing arm (Pro-link suspension system) 40mm diameter cylinder 
Rear Suspension Travel 61 mm (2.4 inches) 

Honda CRF250L Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Injection. Programmed fuel injection system (PGM-FI) 
Engine size - Displacement - Engine capacity 250.00 ccm (15.26 cubic inches) 
Bore x Stroke 76.0 x 55.0 mm (3.0 x 2.2 inches) 
Compression Ratio 10.7:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration DOHC 
Maximum power - Output - Horsepower 22.80 HP (16.6 kW) @ 8500 RPM 
Maximum torque 22.00 Nm (2.2 kgf-m or 16.2 ft.lbs) @ 7000 RPM 
Engine Maximum RPM
Cooling system Liquid 
Lubrication system
Engine oil capacity 1.80 litres (1.90 quarts) 
Exhaust system
Gearbox 6-speed 
Transmission type, final drive ratio Chain 
Clutch type Wet multiplate with coil springs 
Driveline Constant mesh 

Honda CRF250L Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency 3.12 litres/100 km (32.1 km/l or 75.39 mpg) 
CO2 emissions 72.4 CO2 g/km. (CO2 - Carbon dioxide emission) 

Honda CRF250L Electrical Systems, Ignition and Equipment

Ignition Type Full-transistor battery ignition 
Electrical Details 12V 6Ah (10HR) battery. 
Starter Type Electric 
How much horsepower does a Honda CRF250L have?
The Honda CRF250L has 22.80 HP (16.6 kW) @ 8500 RPM.