Harley-Davidson FLHR Road King Specs
(2010)
Key Specs
V2, four-stroke
6-speed
Harley-Davidson FLHR Road King General Information |
|
| Brand | Harley-Davidson |
| Model | Harley-Davidson FLHR Road King |
| Start year | 2010 |
| Year | 2010 |
| Category | Touring |
| Factory Warranty (Years / miles) | - |
Harley-Davidson FLHR Road King Dimensions, Aerodynamics and weight |
|
| Frame type | Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame. |
| Seat details | - |
| Wheelbase | 1,612 mm (63.5 inches) |
| Length | 2,413 mm (95.0 inches) |
| Width | - |
| Height | - |
| Seat Height | 693 mm (27.3 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | 170 mm (6.7 inches) |
| Wheels details | - |
| Front Tyres - Rims dimensions | 130/80-B17 |
| Rear Tyres - Rims dimensions | 180/65-B16 |
| Front brakes | Double disc. 4-piston fixed caliper |
| Rear brakes | Single disc. 4-piston fixed caliper |
| Front Brakes Dimensions - Disc Dimensions | 300 mm (11.8 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 300 mm (11.8 inches) |
| Curb Weight (including fluids) | - |
| Dry Weight | 351.0 kg (773.8 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | - |
| Fuel Tank Capacity | 22.70 litres (6.00 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | 41.3mm telescopic |
| Front Suspension Travel | 117 mm (4.6 inches) |
| Rear Suspension | Air-adjustable |
| Rear Suspension Travel | 76 mm (3.0 inches) |
Harley-Davidson FLHR Road King Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | V2, four-stroke |
| Engine details | - |
| Fuel system | Injection. Electronic Sequential Port Fuel Injection |
| Engine size - Displacement - Engine capacity | 1584.00 ccm (96.66 cubic inches) |
| Bore x Stroke | 95.3 x 111.1 mm (3.8 x 4.4 inches) |
| Compression Ratio | 9.2:1 |
| Number of valves per cylinder | 2 |
| Camshaft Valvetrain Configuration | OHV |
| Maximum power - Output - Horsepower | - |
| Maximum torque | 127.00 Nm (12.9 kgf-m or 93.7 ft.lbs) @ 3500 RPM |
| Engine Maximum RPM | - |
| Cooling system | Air |
| Lubrication system | - |
| Engine oil capacity | 3.50 litres (3.70 quarts) |
| Exhaust system | 2-1-2 chrome exhaust with dual mufflers |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Belt |
| Clutch type | - |
| Driveline | - |
Harley-Davidson FLHR Road King Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
Harley-Davidson FLHR Road King Electrical Systems, Ignition and Equipment |
|
| Ignition Type | - |
| Electrical Details | - |
| Starter Type | - |
| Instruments | - |
| Lights | - |
How much does a Harley-Davidson FLHR Road King weighs?
The Harley-Davidson FLHR Road King weighs 351.0 kg (773.8 pounds).
How tall (seat height) is a Harley-Davidson FLHR Road King?
The Harley-Davidson FLHR Road King seat height is 693 mm (27.3 inches) If adjustable, lowest setting.
How many gears does a Harley-Davidson FLHR Road King has?
The Harley-Davidson FLHR Road King has 6 gears.
The Harley-Davidson FLHR Road King weighs 351.0 kg (773.8 pounds).
How tall (seat height) is a Harley-Davidson FLHR Road King?
The Harley-Davidson FLHR Road King seat height is 693 mm (27.3 inches) If adjustable, lowest setting.
How many gears does a Harley-Davidson FLHR Road King has?
The Harley-Davidson FLHR Road King has 6 gears.