Motorcycles Specs > Enfield > Enfield Classic 350

Enfield Classic 350 Specs

(2017)
The Enfield Classic 350 model is a Classic bike manufactured by Enfield . In this version sold from year 2017 , the dry weight is  and it is equipped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 19.80 HP (14.5 kW)) @ 5250 RPM and a maximum torque of 28.00 Nm (2.9 kgf-m or 20.7 ft.lbs) @ 4000 RPM . With this drive-train, the Enfield Classic 350 is capable of reaching a maximum top speed of  . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Enfield Classic 350 has a Single downtube, using engine as stressed member frame with front suspension being Telescopic, 35mm forks and at the rear, it is equipped with Swing Arm With Gas Shock Absorbers . Stock tire sizes are 90/90-19 on the front, and 110/90-18 on the rear. As for stopping power, the Enfield Classic 350 braking system includes Single disc. 2-piston calipers size 280 mm (11.0 inches) at the front and Expanding brake (drum brake). Single Lead Internal Expanding size 153 mm (6.0 inches) at the back. 

Enfield Classic 350 General Information

Brand Enfield 
Model Enfield Classic 350 
Start year 2017 
Year 2017 
Category Classic 
Factory Warranty (Years / miles)

Enfield Classic 350 Dimensions, Aerodynamics and weight

Frame type Single downtube, using engine as stressed member 
Seat details
Wheelbase 1,370 mm (53.9 inches) 
Length 2,180 mm (85.8 inches) 
Width 790 mm (31.1 inches) 
Height 1,080 mm (42.5 inches) 
Seat Height
Alternate Seat Height
Ground Clearance 135 mm (5.3 inches) 
Trail size
Wheels details Wire spoked 
Front Tyres - Rims dimensions 90/90-19 
Rear Tyres - Rims dimensions 110/90-18 
Front brakes Single disc. 2-piston calipers 
Rear brakes Expanding brake (drum brake). Single Lead Internal Expanding 
Front Brakes Dimensions - Disc Dimensions 280 mm (11.0 inches) 
Rear Brakes Dimensions - Disc Dimensions 153 mm (6.0 inches) 
Curb Weight (including fluids) 187.0 kg (412.3 pounds) 
Dry Weight
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 13.50 litres (3.57 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension Telescopic, 35mm forks 
Front Suspension Travel 130 mm (5.1 inches) 
Rear Suspension Swing Arm With Gas Shock Absorbers 
Rear Suspension Travel 80 mm (3.1 inches) 

Enfield Classic 350 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Carburettor. UCAL 29mm, Constant Vacuum Carburettor 
Engine size - Displacement - Engine capacity 346.00 ccm (21.11 cubic inches) 
Bore x Stroke 70.0 x 90.0 mm (2.8 x 3.5 inches) 
Compression Ratio 8.5:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration Overhead Valves (OHV) 
Maximum power - Output - Horsepower 19.80 HP (14.5 kW)) @ 5250 RPM 
Maximum torque 28.00 Nm (2.9 kgf-m or 20.7 ft.lbs) @ 4000 RPM 
Engine Maximum RPM
Cooling system Air 
Lubrication system Wet sump 
Engine oil capacity
Exhaust system Chrome 
Gearbox 5-speed 
Transmission type, final drive ratio Chain 
Clutch type Mulitiplate 
Driveline Constant mesh 

Enfield Classic 350 Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Enfield Classic 350 Electrical Systems, Ignition and Equipment

Ignition Type Transistorised Coil Ignition 
Electrical Details 12 volt, 14 Ah battery 
Starter Type Electric & kick 
Instruments Analogue 
Lights
How much horsepower does a Enfield Classic 350 have?
The Enfield Classic 350 has 19.80 HP (14.5 kW)) @ 5250 RPM.

How many gears does a Enfield Classic 350 have?
The Enfield Classic 350 have 5 gears.