Motorcycles Specs > Enfield > Enfield Bullet Trials Works Replica 500

Enfield Bullet Trials Works Replica 500 Specs

(2019)
The Enfield Bullet Trials Works Replica 500 model is a Classic bike manufactured by Enfield . In this version sold from year 2019 , the dry weight is  and it is equipped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 27.20 HP (19.9 kW)) @ 5250 RPM and a maximum torque of 41.30 Nm (4.2 kgf-m or 30.5 ft.lbs) @ 4000 RPM . With this drive-train, the Enfield Bullet Trials Works Replica 500 is capable of reaching a maximum top speed of  . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Enfield Bullet Trials Works Replica 500 has a Single downtube, using engine as stressed member frame with front suspension being Telescopic fork, 35 mm and at the rear, it is equipped with Twin gas charged shock absorbers with 5-step adjustable preload . Stock tire sizes are 90/90-19 on the front, and 110/80-18 on the rear. As for stopping power, the Enfield Bullet Trials Works Replica 500 braking system includes Single disc. 2-Piston caliper size 280 mm (11.0 inches) at the front and Single disc. Single-piston caliper size 240 mm (9.4 inches) at the back. 

Enfield Bullet Trials Works Replica 500 General Information

Brand Enfield 
Model Enfield Bullet Trials Works Replica 500 
Start year 2019 
Year 2019 
Category Classic 
Factory Warranty (Years / miles)

Enfield Bullet Trials Works Replica 500 Dimensions, Aerodynamics and weight

Frame type Single downtube, using engine as stressed member 
Seat details
Wheelbase 1,380 mm (54.3 inches) 
Length 2,080 mm (81.9 inches) 
Width 805 mm (31.7 inches) 
Height 1,123 mm (44.2 inches) 
Seat Height 800 mm (31.5 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance 135 mm (5.3 inches) 
Trail size
Wheels details Wire spoked 
Front Tyres - Rims dimensions 90/90-19 
Rear Tyres - Rims dimensions 110/80-18 
Front brakes Single disc. 2-Piston caliper 
Rear brakes Single disc. Single-piston caliper 
Front Brakes Dimensions - Disc Dimensions 280 mm (11.0 inches) 
Rear Brakes Dimensions - Disc Dimensions 240 mm (9.4 inches) 
Curb Weight (including fluids) 196.0 kg (432.1 pounds) 
Dry Weight
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 13.50 litres (3.57 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension Telescopic fork, 35 mm 
Front Suspension Travel 130 mm (5.1 inches) 
Rear Suspension Twin gas charged shock absorbers with 5-step adjustable preload 
Rear Suspension Travel 80 mm (3.1 inches) 

Enfield Bullet Trials Works Replica 500 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details Twin spark 
Fuel system Injection. Keihin 
Engine size - Displacement - Engine capacity 499.00 ccm (30.45 cubic inches) 
Bore x Stroke 84.0 x 90.0 mm (3.3 x 3.5 inches) 
Compression Ratio 8.5:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration Overhead Valves (OHV) 
Maximum power - Output - Horsepower 27.20 HP (19.9 kW)) @ 5250 RPM 
Maximum torque 41.30 Nm (4.2 kgf-m or 30.5 ft.lbs) @ 4000 RPM 
Engine Maximum RPM
Cooling system Air 
Lubrication system Wet sump 
Engine oil capacity
Exhaust system
Gearbox 5-speed 
Transmission type, final drive ratio Chain 
Clutch type Wet mulitiplate 
Driveline Constant mesh 

Enfield Bullet Trials Works Replica 500 Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Enfield Bullet Trials Works Replica 500 Electrical Systems, Ignition and Equipment

Ignition Type Digital 
Electrical Details 12 volt, 14 Ah battery 
Starter Type Electric & kick 
Instruments Analogue 
Lights Halogen headlamp, 60 / 55 W 
How much horsepower does a Enfield Bullet Trials Works Replica 500 have?
The Enfield Bullet Trials Works Replica 500 has 27.20 HP (19.9 kW)) @ 5250 RPM.

How tall (seat height) is a Enfield Bullet Trials Works Replica 500?
The Enfield Bullet Trials Works Replica 500 seat height is 800 mm (31.5 inches) If adjustable, lowest setting.

How many gears does a Enfield Bullet Trials Works Replica 500 have?
The Enfield Bullet Trials Works Replica 500 have 5 gears.