Derbi Senda DRD Pro 50 SM Specs
(2014)
Derbi Senda DRD Pro 50 SM General Information |
|
| Brand | Derbi |
| Model | Derbi Senda DRD Pro 50 SM |
| Start year | 2014 |
| Year | 2014 |
| Category | Super motard |
| Factory Warranty (Years / miles) | - |
Derbi Senda DRD Pro 50 SM Dimensions, Aerodynamics and weight |
|
| Frame type | - |
| Seat details | - |
| Wheelbase | 1,390 mm (54.7 inches) |
| Length | 2,005 mm (78.9 inches) |
| Width | 808 mm (31.8 inches) |
| Height | 1,120 mm (44.1 inches) |
| Seat Height | 850 mm (33.5 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | - |
| Wheels details | Wire spoked |
| Front Tyres - Rims dimensions | 100/80-17 |
| Rear Tyres - Rims dimensions | 130/70-17 |
| Front brakes | Single disc |
| Rear brakes | Single disc |
| Front Brakes Dimensions - Disc Dimensions | 300 mm (11.8 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 220 mm (8.7 inches) |
| Curb Weight (including fluids) | 104.0 kg (229.3 pounds) |
| Dry Weight | 96.0 kg (211.6 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | - |
| Fuel Tank Capacity | 6.50 litres (1.72 gallons) |
| Reserve Fuel Capacity | 1.30 litres (0.34 gallons) |
| Carrying Details and Capacity | - |
| Front Suspension | 40 mm. Upside down fork. |
| Front Suspension Travel | 250 mm (9.8 inches) |
| Rear Suspension | Progressive linkage monoshock with separate gas tank. |
| Rear Suspension Travel | 250 mm (9.8 inches) |
Derbi Senda DRD Pro 50 SM Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | Single cylinder, two-stroke |
| Engine details | - |
| Fuel system | Carburettor. 17.5 mm |
| Engine size - Displacement - Engine capacity | 49.90 ccm (3.04 cubic inches) |
| Bore x Stroke | 39.9 x 40.0 mm (1.6 x 1.6 inches) |
| Compression Ratio | 11.5:1 |
| Number of valves per cylinder | - |
| Camshaft Valvetrain Configuration | Single Overhead Cams (SOHC) |
| Maximum power - Output - Horsepower | - |
| Maximum torque | - |
| Engine Maximum RPM | - |
| Cooling system | Liquid |
| Lubrication system | Oil pump |
| Engine oil capacity | 1.20 litres (1.27 quarts) |
| Exhaust system | - |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Multi-plate |
| Driveline | Primary drive: Gear assembly |
Derbi Senda DRD Pro 50 SM Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | Euro II |
Derbi Senda DRD Pro 50 SM Electrical Systems, Ignition and Equipment |
|
| Ignition Type | CDI |
| Electrical Details | 12V 4Ah battery |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much does a Derbi Senda DRD Pro 50 SM weighs?
The Derbi Senda DRD Pro 50 SM weighs 96.0 kg (211.6 pounds).
How tall (seat height) is a Derbi Senda DRD Pro 50 SM?
The Derbi Senda DRD Pro 50 SM seat height is 850 mm (33.5 inches) If adjustable, lowest setting.
How many gears does a Derbi Senda DRD Pro 50 SM has?
The Derbi Senda DRD Pro 50 SM has 6 gears.
The Derbi Senda DRD Pro 50 SM weighs 96.0 kg (211.6 pounds).
How tall (seat height) is a Derbi Senda DRD Pro 50 SM?
The Derbi Senda DRD Pro 50 SM seat height is 850 mm (33.5 inches) If adjustable, lowest setting.
How many gears does a Derbi Senda DRD Pro 50 SM has?
The Derbi Senda DRD Pro 50 SM has 6 gears.