Motorcycles Specs > BucciMoto > BucciMoto BR10-GP Daytona Anima

BucciMoto BR10-GP Daytona Anima similar models

BucciMoto BR10-GP Daytona Anima Specs

The BucciMoto BR10-GP Daytona Anima model is a Minibike, sport bike manufactured by BucciMoto . In this version sold from year 2018 , the dry weight is 64.0 kg (141.1 pounds) and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the BucciMoto BR10-GP Daytona Anima is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the BucciMoto BR10-GP Daytona Anima have a Perimeter frame with round and oval high strengh tubes frame with front suspension being Upside-down fork and in the rear suspension it is equiped with MUPO with CNC body axle 14mm piston diam. . Stock tire sizes are 100/85-10 on the front, and 110/80-10 on the rear. As for stopping power, the BucciMoto BR10-GP Daytona Anima braking system includes Double disc. Two-piston calipers. size 180 mm (7.1 inches) at the front and Single disc. Two-piston calipers. size 160 mm (6.3 inches) at the rear. 

BucciMoto BR10-GP Daytona Anima General Information

Brand BucciMoto 
Model BucciMoto BR10-GP Daytona Anima 
Start year 2018 
Year 2018 
Category Minibike, sport 
Factory Warranty (Years / miles)  

BucciMoto BR10-GP Daytona Anima Dimensions, Aerodynamics and weight

Frame type Perimeter frame with round and oval high strengh tubes 
Seat details  
Wheelbase 1,070 mm (42.1 inches) 
Length  
Width  
Height  
Seat Height 650 mm (25.6 inches) If adjustable, lowest setting. 
Alternate Seat Height  
Ground Clearance  
Trail size  
Wheels details  
Front Tyres - Rims dimensions 100/85-10 
Rear Tyres - Rims dimensions 110/80-10 
Front brakes Double disc. Two-piston calipers. 
Rear brakes Single disc. Two-piston calipers. 
Front Brakes Dimensions - Disc Dimensions 180 mm (7.1 inches) 
Rear Brakes Dimensions - Disc Dimensions 160 mm (6.3 inches) 
Curb Weight (including fluids)  
Dry Weight 64.0 kg (141.1 pounds) 
Front Percentage of Weight  
Rear Percentage of Weight  
Weight-Power Output Ratio :  
Fuel Tank Capacity  
Reserve Fuel Capacity  
Carrying Details and Capacity  
Front Suspension Upside-down fork 
Front Suspension Travel 80 mm (3.1 inches) 
Rear Suspension MUPO with CNC body axle 14mm piston diam. 
Rear Suspension Travel 50 mm (2.0 inches) 

BucciMoto BR10-GP Daytona Anima Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details Optional 190cc enegine 
Fuel system Carburettor. PE 28 Keihin 
Engine size - Displacement - Engine capacity 150.00 ccm (9.15 cubic inches) 
Bore x Stroke  
Compression Ratio  
Number of valves per cylinder  
Camshaft Valvetrain Configuration  
Maximum power - Output - Horsepower  
Maximum torque  
Engine Maximum RPM  
Cooling system Oil & air 
Lubrication system Oil filter inside crankcase 
Engine oil capacity  
Exhaust system LM Exhaust exclusive Buccimoto in stainless steel with carbon cup and variable section 
Gearbox  
Transmission type, final drive ratio Chain 
Clutch type Multidisc, wet type clutch 
Driveline  

BucciMoto BR10-GP Daytona Anima Performance

Top Speed  
Acceleration 0 to 100 km/h (0 to 62 mph)  
Acceleration 0 to 400m (1/4 mile)  
Recuperation 60 to 140 km/h in highest gear  
Fuel Consumption - MPG - Economy - Efficiency  
CO2 emissions  
Emissions  

BucciMoto BR10-GP Daytona Anima Electrical Systems, Ignition and Equipment

Ignition Type Electronic ignition, medium weight flywheel 
Electrical Details  
Starter Type Kick 
Instruments  
Lights