Motorcycles Specs > BMW > BMW HP2 Enduro


BMW HP2 Enduro Specs

(2007)
The BMW HP2 Enduro model is a Enduro / offroad bike manufactured by BMW . In this version sold from year 2007 , the dry weight is 175.0 kg (385.8 pounds) and it is equiped with a Two cylinder boxer, four-stroke motor. The engine produces a maximum peak output power of 105.00 HP (76.6 kW) @ 7000 RPM and a maximum torque of 115.00 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 5500 RPM . With this drive-train, the BMW HP2 Enduro is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the BMW HP2 Enduro have a  frame with front suspension being  and in the rear suspension it is equiped with  . Stock tire sizes are 90/90-S21 on the front, and 140/80-S17 on the rear. As for stopping power, the BMW HP2 Enduro braking system includes Single disc size 305 mm (12.0 inches) at the front and Single disc size 265 mm (10.4 inches) at the rear. 

BMW HP2 Enduro General Information

Brand BMW 
Model BMW HP2 Enduro 
Start year 2007 
Year 2007 
Category Enduro / offroad 
Factory Warranty (Years / miles)

BMW HP2 Enduro Dimensions, Aerodynamics and weight

Frame type
Seat details
Wheelbase 1,610 mm (63.4 inches) 
Length 2,350 mm (92.5 inches) 
Width
Height
Seat Height 920 mm (36.2 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size
Wheels details
Front Tyres - Rims dimensions 90/90-S21 
Rear Tyres - Rims dimensions 140/80-S17 
Front brakes Single disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 305 mm (12.0 inches) 
Rear Brakes Dimensions - Disc Dimensions 265 mm (10.4 inches) 
Curb Weight (including fluids)
Dry Weight 175.0 kg (385.8 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio : 0.6000 HP/kg 
Fuel Tank Capacity 13.00 litres (3.43 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension
Front Suspension Travel
Rear Suspension
Rear Suspension Travel

BMW HP2 Enduro Engine and Transmission Technical Data

Engine type - Number of cylinders Two cylinder boxer, four-stroke 
Engine details
Fuel system
Engine size - Displacement - Engine capacity 1130.00 ccm (68.95 cubic inches) 
Bore x Stroke 101.0 x 73.0 mm (4.0 x 2.9 inches) 
Compression Ratio
Number of valves per cylinder
Camshaft Valvetrain Configuration
Maximum power - Output - Horsepower 105.00 HP (76.6 kW) @ 7000 RPM 
Maximum torque 115.00 Nm (11.7 kgf-m or 84.8 ft.lbs) @ 5500 RPM 
Engine Maximum RPM
Cooling system Oil & air 
Lubrication system
Engine oil capacity
Exhaust system
Gearbox 6-speed 
Transmission type, final drive ratio Shaft drive (cardan) 
Clutch type
Driveline

BMW HP2 Enduro Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency 5.50 litres/100 km (18.2 km/l or 42.77 mpg) 
CO2 emissions 127.6 CO2 g/km. (CO2 - Carbon dioxide emission) 
Emissions

BMW HP2 Enduro Electrical Systems, Ignition and Equipment

Ignition Type
Electrical Details
Starter Type
Instruments
Lights
How much horsepower does a BMW HP2 Enduro have?
The BMW HP2 Enduro has 105.00 HP (76.6 kW) @ 7000 RPM.

How much does a BMW HP2 Enduro weighs?
The BMW HP2 Enduro weighs 175.0 kg (385.8 pounds).

How tall (seat height) is a BMW HP2 Enduro?
The BMW HP2 Enduro seat height is 920 mm (36.2 inches) If adjustable, lowest setting.