Bimota Tesi3D Specs
(2016)
Bimota Tesi3D General Information |
|
| Brand | Bimota |
| Model | Bimota Tesi3D |
| Start year | 2016 |
| Year | 2016 |
| Category | Naked |
| Factory Warranty (Years / miles) | - |
Bimota Tesi3D Dimensions, Aerodynamics and weight |
|
| Frame type | Aluminium plates, front and rear swingarm NiCrmo4 steel. |
| Seat details | - |
| Wheelbase | 1,390 mm (54.7 inches) |
| Length | 2,100 mm (82.7 inches) |
| Width | 700 mm (27.6 inches) |
| Height | 1,120 mm (44.1 inches) |
| Seat Height | 800 mm (31.5 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | - |
| Wheels details | Forged Aluminium Alloy, black 5-spoke |
| Front Tyres - Rims dimensions | 120/70-ZR17 |
| Rear Tyres - Rims dimensions | 180/55-ZR17 |
| Front brakes | Double disc. Bremo 4-piston, four separates pads, radial pump |
| Rear brakes | Single disc. Bremo, 2-piston |
| Front Brakes Dimensions - Disc Dimensions | 320 mm (12.6 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 220 mm (8.7 inches) |
| Curb Weight (including fluids) | - |
| Dry Weight | 170.0 kg (374.8 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.5765 HP/kg |
| Fuel Tank Capacity | 16.00 litres (4.23 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Öhlins monoshock adjustable in preload, in compression and rebound damping on single speed. |
| Front Suspension Travel | 115 mm (4.5 inches) |
| Rear Suspension | Öhlins monoshock adjustable in preload, compression and rebound damping on single speed. |
| Rear Suspension Travel | 120 mm (4.7 inches) |
Bimota Tesi3D Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | V2, four-stroke |
| Engine details | Ducati 90 degree L-Twin |
| Fuel system | Injection. Athena |
| Engine size - Displacement - Engine capacity | 1078.00 ccm (65.78 cubic inches) |
| Bore x Stroke | 98.0 x 71.5 mm (3.9 x 2.8 inches) |
| Compression Ratio | 10.5:1 |
| Number of valves per cylinder | 2 |
| Camshaft Valvetrain Configuration | Desmodromic valve control |
| Maximum power - Output - Horsepower | 98.00 HP (71.5 kW)) @ 7500 RPM |
| Maximum torque | 98.00 Nm (10.0 kgf-m or 72.3 ft.lbs) @ 6750 RPM |
| Engine Maximum RPM | 9000 |
| Cooling system | Oil & air |
| Lubrication system | - |
| Engine oil capacity | - |
| Exhaust system | - |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Dry Clutch, multi-disc |
| Driveline | - |
Bimota Tesi3D Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
Bimota Tesi3D Electrical Systems, Ignition and Equipment |
|
| Ignition Type | - |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much horsepower does a Bimota Tesi3D has?
The Bimota Tesi3D has 98.00 HP (71.5 kW)) @ 7500 RPM.
How much does a Bimota Tesi3D weighs?
The Bimota Tesi3D weighs 170.0 kg (374.8 pounds).
How tall (seat height) is a Bimota Tesi3D?
The Bimota Tesi3D seat height is 800 mm (31.5 inches) If adjustable, lowest setting.
How many gears does a Bimota Tesi3D has?
The Bimota Tesi3D has 6 gears.
The Bimota Tesi3D has 98.00 HP (71.5 kW)) @ 7500 RPM.
How much does a Bimota Tesi3D weighs?
The Bimota Tesi3D weighs 170.0 kg (374.8 pounds).
How tall (seat height) is a Bimota Tesi3D?
The Bimota Tesi3D seat height is 800 mm (31.5 inches) If adjustable, lowest setting.
How many gears does a Bimota Tesi3D has?
The Bimota Tesi3D has 6 gears.