Bimota Tesi 3D E Specs
(2013)
Bimota Tesi 3D E General Information |
|
| Brand | Bimota |
| Model | Bimota Tesi 3D E |
| Start year | 2013 |
| Year | 2013 |
| Category | Sport |
| Factory Warranty (Years / miles) | - |
Bimota Tesi 3D E Dimensions, Aerodynamics and weight |
|
| Frame type | Avional lateral plates |
| Seat details | - |
| Wheelbase | 1,390 mm (54.7 inches) |
| Length | 2,010 mm (79.1 inches) |
| Width | 720 mm (28.3 inches) |
| Height | 1,120 mm (44.1 inches) |
| Seat Height | 800 mm (31.5 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | - |
| Wheels details | Forged Aluminium Alloy |
| Front Tyres - Rims dimensions | 120/70-17 |
| Rear Tyres - Rims dimensions | 180/55-17 |
| Front brakes | Double disc. 4-piston |
| Rear brakes | Single disc. 2-piston |
| Front Brakes Dimensions - Disc Dimensions | 320 mm (12.6 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 220 mm (8.7 inches) |
| Curb Weight (including fluids) | - |
| Dry Weight | 167.0 kg (368.2 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.5389 HP/kg |
| Fuel Tank Capacity | 16.00 litres (4.23 gallons) |
| Reserve Fuel Capacity | 5.00 litres (1.32 gallons) |
| Carrying Details and Capacity | - |
| Front Suspension | Push-rod with preload,extension and compression adjustable monoshock |
| Front Suspension Travel | 115 mm (4.5 inches) |
| Rear Suspension | Push-rod with spring preload, extension and compression adjustable monoshock |
| Rear Suspension Travel | 120 mm (4.7 inches) |
Bimota Tesi 3D E Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | V2, four-stroke |
| Engine details | 90 degree L-Twin |
| Fuel system | Injection. Walbro |
| Engine size - Displacement - Engine capacity | 1079.00 ccm (65.84 cubic inches) |
| Bore x Stroke | 98.0 x 71.5 mm (3.9 x 2.8 inches) |
| Compression Ratio | 10.7:1 |
| Number of valves per cylinder | 2 |
| Camshaft Valvetrain Configuration | Desmodromic valve control |
| Maximum power - Output - Horsepower | 90.00 HP (65.7 kW) @ 7500 RPM |
| Maximum torque | 105.00 Nm (10.7 kgf-m or 77.4 ft.lbs) @ 5500 RPM |
| Engine Maximum RPM | 9000 |
| Cooling system | Oil & air |
| Lubrication system | - |
| Engine oil capacity | - |
| Exhaust system | - |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Dry Clutch, multi-disc |
| Driveline | Primary Drive: 32/59 teeth. Final Drive: 15/40 teeth. |
Bimota Tesi 3D E Performance |
|
| Top Speed | 228.0 km/h (141.7 mph) |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | Euro 3 |
Bimota Tesi 3D E Electrical Systems, Ignition and Equipment |
|
| Ignition Type | - |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much horsepower does a Bimota Tesi 3D E has?
The Bimota Tesi 3D E has 90.00 HP (65.7 kW) @ 7500 RPM.
How fast is a Bimota Tesi 3D E?
The Bimota Tesi 3D E top speed is 228.0 km/h (141.7 mph).
How much does a Bimota Tesi 3D E weighs?
The Bimota Tesi 3D E weighs 167.0 kg (368.2 pounds).
How tall (seat height) is a Bimota Tesi 3D E?
The Bimota Tesi 3D E seat height is 800 mm (31.5 inches) If adjustable, lowest setting.
How many gears does a Bimota Tesi 3D E has?
The Bimota Tesi 3D E has 6 gears.
The Bimota Tesi 3D E has 90.00 HP (65.7 kW) @ 7500 RPM.
How fast is a Bimota Tesi 3D E?
The Bimota Tesi 3D E top speed is 228.0 km/h (141.7 mph).
How much does a Bimota Tesi 3D E weighs?
The Bimota Tesi 3D E weighs 167.0 kg (368.2 pounds).
How tall (seat height) is a Bimota Tesi 3D E?
The Bimota Tesi 3D E seat height is 800 mm (31.5 inches) If adjustable, lowest setting.
How many gears does a Bimota Tesi 3D E has?
The Bimota Tesi 3D E has 6 gears.