Motorcycles Specs > Beta > Beta Rev-3 125


Beta Rev-3 125 Specs

(2006)
The Beta Rev-3 125 model is a Trial bike manufactured by Beta . In this version sold from year 2006 , the dry weight is 71.0 kg (156.5 pounds) and it is equiped with a Single cylinder, two-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Beta Rev-3 125 is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Beta Rev-3 125 have a Aluminium frame with front suspension being Hydraulic fork and in the rear suspension it is equiped with Monoshock . Stock tire sizes are  on the front, and  on the rear. As for stopping power, the Beta Rev-3 125 braking system includes Single disc size 185 mm (7.3 inches) at the front and Single disc size 175 mm (6.9 inches) at the rear. 

Beta Rev-3 125 General Information

Brand Beta 
Model Beta Rev-3 125 
Start year 2006 
Year 2006 
Category Trial 
Factory Warranty (Years / miles)

Beta Rev-3 125 Dimensions, Aerodynamics and weight

Frame type Aluminium 
Seat details
Wheelbase 1,310 mm (51.6 inches) 
Length 1,990 mm (78.3 inches) 
Width 850 mm (33.5 inches) 
Height
Seat Height
Alternate Seat Height
Ground Clearance 310 mm (12.2 inches) 
Trail size
Wheels details
Front Tyres - Rims dimensions
Rear Tyres - Rims dimensions
Front brakes Single disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 185 mm (7.3 inches) 
Rear Brakes Dimensions - Disc Dimensions 175 mm (6.9 inches) 
Curb Weight (including fluids)
Dry Weight 71.0 kg (156.5 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 4.20 litres (1.11 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension Hydraulic fork 
Front Suspension Travel 185 mm (7.3 inches) 
Rear Suspension Monoshock 
Rear Suspension Travel 165 mm (6.5 inches) 

Beta Rev-3 125 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, two-stroke 
Engine details
Fuel system Carburettor. Mikuni VM26/208 
Engine size - Displacement - Engine capacity 124.00 ccm (7.57 cubic inches) 
Bore x Stroke 54.0 x 54.0 mm (2.1 x 2.1 inches) 
Compression Ratio 14.0:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM
Cooling system Liquid 
Lubrication system Fuel mix 1.5% 
Engine oil capacity
Exhaust system
Gearbox 6-speed 
Transmission type, final drive ratio Chain 
Clutch type Wet multi-disc clutch with cush-drive rubber 
Driveline

Beta Rev-3 125 Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Beta Rev-3 125 Electrical Systems, Ignition and Equipment

Ignition Type Electronic 
Electrical Details
Starter Type
Instruments
Lights
How much does a Beta Rev-3 125 weighs?
The Beta Rev-3 125 weighs 71.0 kg (156.5 pounds).