Motorcycles Specs > Beta > Beta REV 3 - 200


Beta REV 3 - 200 Specs

(2007)
The Beta REV 3 - 200 model is a Trial bike manufactured by Beta . In this version sold from year 2007 , the dry weight is 71.0 kg (156.5 pounds) and it is equiped with a Single cylinder, two-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Beta REV 3 - 200 is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Beta REV 3 - 200 have a Double wave aluminium beam frame with front suspension being  and in the rear suspension it is equiped with Hydraulic monoshock . Stock tire sizes are 2.75-21 on the front, and 4.00-18 on the rear. As for stopping power, the Beta REV 3 - 200 braking system includes  size 185 mm (7.3 inches) at the front and  size 165 mm (6.5 inches) at the rear. 

Beta REV 3 - 200 General Information

Brand Beta 
Model Beta REV 3 - 200 
Start year 2007 
Year 2007 
Category Trial 
Factory Warranty (Years / miles)

Beta REV 3 - 200 Dimensions, Aerodynamics and weight

Frame type Double wave aluminium beam 
Seat details
Wheelbase 1,310 mm (51.6 inches) 
Length 1,990 mm (78.3 inches) 
Width 850 mm (33.5 inches) 
Height 1,120 mm (44.1 inches) 
Seat Height 660 mm (26.0 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance 310 mm (12.2 inches) 
Trail size
Wheels details
Front Tyres - Rims dimensions 2.75-21 
Rear Tyres - Rims dimensions 4.00-18 
Front brakes
Rear brakes
Front Brakes Dimensions - Disc Dimensions 185 mm (7.3 inches) 
Rear Brakes Dimensions - Disc Dimensions 165 mm (6.5 inches) 
Curb Weight (including fluids)
Dry Weight 71.0 kg (156.5 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 3.20 litres (0.85 gallons) 
Reserve Fuel Capacity 1.00 litres (0.26 gallons) 
Carrying Details and Capacity
Front Suspension
Front Suspension Travel 38 mm (1.5 inches) 
Rear Suspension Hydraulic monoshock 
Rear Suspension Travel

Beta REV 3 - 200 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, two-stroke 
Engine details
Fuel system Carburettor. Mikuni VM26/208 
Engine size - Displacement - Engine capacity 195.00 ccm (11.90 cubic inches) 
Bore x Stroke 64.0 x 64.0 mm (2.5 x 2.5 inches) 
Compression Ratio 11.8:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM
Cooling system Liquid 
Lubrication system mix with fuel 1,5 % (synthetic oil) 
Engine oil capacity
Exhaust system
Gearbox 6-speed 
Transmission type, final drive ratio Chain 
Clutch type Wet multi-disc clutch with cush-drive rubber 
Driveline

Beta REV 3 - 200 Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Beta REV 3 - 200 Electrical Systems, Ignition and Equipment

Ignition Type Electronic AET 12V - 85W 
Electrical Details
Starter Type
Instruments
Lights
How much does a Beta REV 3 - 200 weighs?
The Beta REV 3 - 200 weighs 71.0 kg (156.5 pounds).

How tall (seat height) is a Beta REV 3 - 200?
The Beta REV 3 - 200 seat height is 660 mm (26.0 inches) If adjustable, lowest setting.