Motorcycles Specs > Beta > Beta Alp 200

Beta Alp 200 Specs

(2020)
The Beta Alp 200 model is a Enduro / offroad bike manufactured by Beta . In this version sold from year 2020 , the dry weight is 108.0 kg (238.1 pounds) and it is equipped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Beta Alp 200 is capable of reaching a maximum top speed of  . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Beta Alp 200 has a Seel Double Cradle frame with front suspension being Hydraulic Telescopic 37mm and at the rear, it is equipped with Monocross single shock, adjustable preload . Stock tire sizes are 2.75-21 on the front, and 4-18 on the rear. As for stopping power, the Beta Alp 200 braking system includes Single disc size 245 mm (9.6 inches) at the front and Single disc size 220 mm (8.7 inches) at the back. 

Beta Alp 200 General Information

Brand Beta 
Model Beta Alp 200 
Start year 2020 
Year 2020 
Category Enduro / offroad 
Factory Warranty (Years / miles)

Beta Alp 200 Dimensions, Aerodynamics and weight

Frame type Seel Double Cradle 
Seat details
Wheelbase 1,355 mm (53.3 inches) 
Length 2,100 mm (82.7 inches) 
Width 800 mm (31.5 inches) 
Height 1,107 mm (43.6 inches) 
Seat Height 830 mm (32.7 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance 300 mm (11.8 inches) 
Trail size
Wheels details
Front Tyres - Rims dimensions 2.75-21 
Rear Tyres - Rims dimensions 4-18 
Front brakes Single disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 245 mm (9.6 inches) 
Rear Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Curb Weight (including fluids)
Dry Weight 108.0 kg (238.1 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 6.00 litres (1.59 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension Hydraulic Telescopic 37mm 
Front Suspension Travel
Rear Suspension Monocross single shock, adjustable preload 
Rear Suspension Travel

Beta Alp 200 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Carburettor. Mikuni BST 31 42AD 
Engine size - Displacement - Engine capacity 199.00 ccm (12.14 cubic inches) 
Bore x Stroke 66.0 x 58.2 mm (2.6 x 2.3 inches) 
Compression Ratio 9.4:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration Single Overhead Cams (SOHC) 
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM
Cooling system Air 
Lubrication system Forced oil lubrication with oil pumps 
Engine oil capacity
Exhaust system
Gearbox
Transmission type, final drive ratio
Clutch type Wet multi-disc 
Driveline

Beta Alp 200 Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Beta Alp 200 Electrical Systems, Ignition and Equipment

Ignition Type Electronic ignition 
Electrical Details
Starter Type Electric & kick 
Instruments
Lights
How much does a Beta Alp 200 weighs?
The Beta Alp 200 weighs 108.0 kg (238.1 pounds).

How tall (seat height) is a Beta Alp 200?
The Beta Alp 200 seat height is 830 mm (32.7 inches) If adjustable, lowest setting.