Benelli Velvet 150 Specs
(2014)
Benelli Velvet 150 General Information |
|
| Brand | Benelli |
| Model | Benelli Velvet 150 |
| Start year | 2014 |
| Year | 2014 |
| Category | Scooter |
| Factory Warranty (Years / miles) | - |
Benelli Velvet 150 Dimensions, Aerodynamics and weight |
|
| Frame type | Steel trestle with a double cradle in high tensile strength steel tube |
| Seat details | - |
| Wheelbase | 1,400 mm (55.1 inches) |
| Length | 1,910 mm (75.2 inches) |
| Width | - |
| Height | - |
| Seat Height | 818 mm (32.2 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | - |
| Wheels details | - |
| Front Tyres - Rims dimensions | 120/70-R13 |
| Rear Tyres - Rims dimensions | 140/70-R13 |
| Front brakes | Single disc. Floating double piston calliper |
| Rear brakes | Single disc. Two opposed pistons |
| Front Brakes Dimensions - Disc Dimensions | 241 mm (9.5 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 220 mm (8.7 inches) |
| Curb Weight (including fluids) | 129.0 kg (284.4 pounds) |
| Dry Weight | 122.0 kg (269.0 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.0869 HP/kg |
| Fuel Tank Capacity | 11.70 litres (3.09 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Hydraulic telescopic fork |
| Front Suspension Travel | 95 mm (3.7 inches) |
| Rear Suspension | Floating engine with double hydraulic rear dumper |
| Rear Suspension Travel | 75 mm (3.0 inches) |
Benelli Velvet 150 Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | Single cylinder, four-stroke |
| Engine details | Horizontal cylinder |
| Fuel system | Carburettor. PD26JC |
| Engine size - Displacement - Engine capacity | 152.00 ccm (9.28 cubic inches) |
| Bore x Stroke | 57.6 x 57.8 mm (2.3 x 2.3 inches) |
| Compression Ratio | 12.0:1 |
| Number of valves per cylinder | 2 |
| Camshaft Valvetrain Configuration | Overhead Cams (OHC) |
| Maximum power - Output - Horsepower | 10.60 HP (7.7 kW)) @ 7750 RPM |
| Maximum torque | 10.50 Nm (1.1 kgf-m or 7.7 ft.lbs) @ 6000 RPM |
| Engine Maximum RPM | - |
| Cooling system | Air |
| Lubrication system | Wet crankcase |
| Engine oil capacity | - |
| Exhaust system | With catalytic converter |
| Gearbox | Automatic |
| Transmission type, final drive ratio | Belt |
| Clutch type | Automatic centrifugal |
| Driveline | Primary V-bet, final gears |
Benelli Velvet 150 Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
Benelli Velvet 150 Electrical Systems, Ignition and Equipment |
|
| Ignition Type | - |
| Electrical Details | 12V 10Ah battery |
| Starter Type | Electric & kick |
| Instruments | - |
| Lights | - |
How much horsepower does a Benelli Velvet 150 has?
The Benelli Velvet 150 has 10.60 HP (7.7 kW)) @ 7750 RPM.
How much does a Benelli Velvet 150 weighs?
The Benelli Velvet 150 weighs 122.0 kg (269.0 pounds).
How tall (seat height) is a Benelli Velvet 150?
The Benelli Velvet 150 seat height is 818 mm (32.2 inches) If adjustable, lowest setting.
How many gears does a Benelli Velvet 150 has?
The Benelli Velvet 150 has Automatic gears.
The Benelli Velvet 150 has 10.60 HP (7.7 kW)) @ 7750 RPM.
How much does a Benelli Velvet 150 weighs?
The Benelli Velvet 150 weighs 122.0 kg (269.0 pounds).
How tall (seat height) is a Benelli Velvet 150?
The Benelli Velvet 150 seat height is 818 mm (32.2 inches) If adjustable, lowest setting.
How many gears does a Benelli Velvet 150 has?
The Benelli Velvet 150 has Automatic gears.