Benelli Tornado Naked T 125 Specs
(2020)
Benelli Tornado Naked T 125 General Information |
|
| Brand | Benelli |
| Model | Benelli Tornado Naked T 125 |
| Start year | 2020 |
| Year | 2020 |
| Category | Minibike, sport |
| Factory Warranty (Years / miles) | - |
Benelli Tornado Naked T 125 Dimensions, Aerodynamics and weight |
|
| Frame type | Trestle in steel tubes |
| Seat details | - |
| Wheelbase | 1,215 mm (47.8 inches) |
| Length | 1,770 mm (69.7 inches) |
| Width | 780 mm (30.7 inches) |
| Height | 1,080 mm (42.5 inches) |
| Seat Height | 780 mm (30.7 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | 160 mm (6.3 inches) |
| Trail size | - |
| Wheels details | Aluminum alloy |
| Front Tyres - Rims dimensions | 120/70-ZR12 |
| Rear Tyres - Rims dimensions | 130/70-ZR12 |
| Front brakes | Single disc. 2-piston caliper |
| Rear brakes | Single disc |
| Front Brakes Dimensions - Disc Dimensions | 210 mm (8.3 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 190 mm (7.5 inches) |
| Curb Weight (including fluids) | - |
| Dry Weight | 116.0 kg (255.7 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.0957 HP/kg |
| Fuel Tank Capacity | 7.20 litres (1.90 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Upside-down forks, 35mm |
| Front Suspension Travel | 120 mm (4.7 inches) |
| Rear Suspension | Rear swing arm with lateral shock absorber with spring pre-load adjustment |
| Rear Suspension Travel | - |
Benelli Tornado Naked T 125 Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | Single cylinder, four-stroke |
| Engine details | - |
| Fuel system | Injection. Electronic fuel injection with throttle body d.28 |
| Engine size - Displacement - Engine capacity | 124.80 ccm (7.62 cubic inches) |
| Bore x Stroke | 54.0 x 54.5 mm (2.1 x 2.1 inches) |
| Compression Ratio | 9.8:1 |
| Number of valves per cylinder | 4 |
| Camshaft Valvetrain Configuration | Single Overhead Cams (SOHC) |
| Maximum power - Output - Horsepower | 11.10 HP (8.1 kW)) @ 9500 RPM |
| Maximum torque | 10.00 Nm (1.0 kgf-m or 7.4 ft.lbs) @ 7000 RPM |
| Engine Maximum RPM | - |
| Cooling system | Air |
| Lubrication system | Wet sump |
| Engine oil capacity | - |
| Exhaust system | With catalytic converter and oxygen sensors |
| Gearbox | 5-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Wet clutch |
| Driveline | - |
Benelli Tornado Naked T 125 Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | 2.20 litres/100 km (45.5 km/l or 106.92 mpg) |
| CO2 emissions | 51.0 CO2 g/km. (CO2 - Carbon dioxide emission) |
| Emissions | Euro 4 |
Benelli Tornado Naked T 125 Electrical Systems, Ignition and Equipment |
|
| Ignition Type | Athena MB2QJG |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much horsepower does a Benelli Tornado Naked T 125 has?
The Benelli Tornado Naked T 125 has 11.10 HP (8.1 kW)) @ 9500 RPM.
How much does a Benelli Tornado Naked T 125 weighs?
The Benelli Tornado Naked T 125 weighs 116.0 kg (255.7 pounds).
How tall (seat height) is a Benelli Tornado Naked T 125?
The Benelli Tornado Naked T 125 seat height is 780 mm (30.7 inches) If adjustable, lowest setting.
How many gears does a Benelli Tornado Naked T 125 has?
The Benelli Tornado Naked T 125 has 5 gears.
The Benelli Tornado Naked T 125 has 11.10 HP (8.1 kW)) @ 9500 RPM.
How much does a Benelli Tornado Naked T 125 weighs?
The Benelli Tornado Naked T 125 weighs 116.0 kg (255.7 pounds).
How tall (seat height) is a Benelli Tornado Naked T 125?
The Benelli Tornado Naked T 125 seat height is 780 mm (30.7 inches) If adjustable, lowest setting.
How many gears does a Benelli Tornado Naked T 125 has?
The Benelli Tornado Naked T 125 has 5 gears.