Motorcycles Specs > Benelli > Benelli Pepe LX



Benelli Pepe LX Specs

(2006)
Blank image
The Benelli Pepe LX model is a Scooter bike manufactured by Benelli . In this version sold from year 2006 , the dry weight is 81.0 kg (178.6 pounds) and it is equipped with a Single cylinder, two-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Benelli Pepe LX is capable of reaching a maximum top speed of  . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Benelli Pepe LX has a Double single beam, in high resistance ALS steel tubes, welded in robotized block with cataphoresis treatment frame with front suspension being Telescopic fork and at the rear, it is equipped with Engine acting as an oscillating swing-arm . Stock tire sizes are  on the front, and  on the rear. As for stopping power, the Benelli Pepe LX braking system includes Single disc size 220 mm (8.7 inches) at the front and Expanding brake (drum brake) size 110 mm (4.3 inches) at the back. 

Benelli Pepe LX General Information

Brand Benelli 
Model Benelli Pepe LX 
Start year 2006 
Year 2006 
Category Scooter 
Factory Warranty (Years / miles)

Benelli Pepe LX Dimensions, Aerodynamics and weight

Frame type Double single beam, in high resistance ALS steel tubes, welded in robotized block with cataphoresis treatment 
Seat details
Wheelbase 1,260 mm (49.6 inches) 
Length 1,875 mm (73.8 inches) 
Width
Height
Seat Height 740 mm (29.1 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size
Wheels details
Front Tyres - Rims dimensions
Rear Tyres - Rims dimensions
Front brakes Single disc 
Rear brakes Expanding brake (drum brake) 
Front Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Rear Brakes Dimensions - Disc Dimensions 110 mm (4.3 inches) 
Curb Weight (including fluids)
Dry Weight 81.0 kg (178.6 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 7.50 litres (1.98 gallons) 
Reserve Fuel Capacity 1.50 litres (0.40 gallons) 
Carrying Details and Capacity
Front Suspension Telescopic fork 
Front Suspension Travel
Rear Suspension Engine acting as an oscillating swing-arm 
Rear Suspension Travel

Benelli Pepe LX Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, two-stroke 
Engine details
Fuel system Carburettor. Dellorto PHVA 12 mm. 
Engine size - Displacement - Engine capacity 49.20 ccm (3.00 cubic inches) 
Bore x Stroke 40.0 x 39.2 mm (1.6 x 1.5 inches) 
Compression Ratio
Number of valves per cylinder
Camshaft Valvetrain Configuration SOHC 
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM
Cooling system Air 
Lubrication system Separate with automatic mixing 
Engine oil capacity
Exhaust system
Gearbox
Transmission type, final drive ratio Belt 
Clutch type Automatic centrifugal 
Driveline

Benelli Pepe LX Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Benelli Pepe LX Electrical Systems, Ignition and Equipment

Ignition Type
Electrical Details
Starter Type Electric & kick 
Instruments
Lights
How much does a Benelli Pepe LX weighs?
The Benelli Pepe LX weighs 81.0 kg (178.6 pounds).

How tall (seat height) is a Benelli Pepe LX?
The Benelli Pepe LX seat height is 740 mm (29.1 inches) If adjustable, lowest setting.