Benelli Pepe 50 Specs
(2016)
Benelli Pepe 50 General Information |
|
| Brand | Benelli |
| Model | Benelli Pepe 50 |
| Start year | 2016 |
| Year | 2016 |
| Category | Scooter |
| Factory Warranty (Years / miles) | - |
Benelli Pepe 50 Dimensions, Aerodynamics and weight |
|
| Frame type | - |
| Seat details | - |
| Wheelbase | 1,285 mm (50.6 inches) |
| Length | 1,875 mm (73.8 inches) |
| Width | 710 mm (28.0 inches) |
| Height | 1,090 mm (42.9 inches) |
| Seat Height | 770 mm (30.3 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | - |
| Trail size | - |
| Wheels details | Aluminum alloy wheels |
| Front Tyres - Rims dimensions | 2.50-16 |
| Rear Tyres - Rims dimensions | 2.75-16 |
| Front brakes | Single disc |
| Rear brakes | Expanding brake (drum brake) |
| Front Brakes Dimensions - Disc Dimensions | 220 mm (8.7 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 110 mm (4.3 inches) |
| Curb Weight (including fluids) | 98.0 kg (216.1 pounds) |
| Dry Weight | 93.0 kg (205.0 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.0511 HP/kg |
| Fuel Tank Capacity | 6.00 litres (1.59 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Hydraulic telescopic fork |
| Front Suspension Travel | 85 mm (3.3 inches) |
| Rear Suspension | Floating engine with hydraulic rear dumper |
| Rear Suspension Travel | 55 mm (2.2 inches) |
Benelli Pepe 50 Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | Single cylinder, four-stroke |
| Engine details | - |
| Fuel system | Carburettor |
| Engine size - Displacement - Engine capacity | 49.00 ccm (2.99 cubic inches) |
| Bore x Stroke | 37.0 x 46.4 mm (1.5 x 1.8 inches) |
| Compression Ratio | 7.5:1 |
| Number of valves per cylinder | 4 |
| Camshaft Valvetrain Configuration | Single Overhead Cams (SOHC) |
| Maximum power - Output - Horsepower | 4.75 HP (3.5 kW)) |
| Maximum torque | 4.20 Nm (0.4 kgf-m or 3.1 ft.lbs) |
| Engine Maximum RPM | - |
| Cooling system | Air |
| Lubrication system | Forced lubrication |
| Engine oil capacity | - |
| Exhaust system | - |
| Gearbox | Automatic |
| Transmission type, final drive ratio | Belt |
| Clutch type | Wet, cable operated |
| Driveline | - |
Benelli Pepe 50 Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | Euro 2 |
Benelli Pepe 50 Electrical Systems, Ignition and Equipment |
|
| Ignition Type | - |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much horsepower does a Benelli Pepe 50 has?
The Benelli Pepe 50 has 4.75 HP (3.5 kW)).
How much does a Benelli Pepe 50 weighs?
The Benelli Pepe 50 weighs 93.0 kg (205.0 pounds).
How tall (seat height) is a Benelli Pepe 50?
The Benelli Pepe 50 seat height is 770 mm (30.3 inches) If adjustable, lowest setting.
How many gears does a Benelli Pepe 50 has?
The Benelli Pepe 50 has Automatic gears.
The Benelli Pepe 50 has 4.75 HP (3.5 kW)).
How much does a Benelli Pepe 50 weighs?
The Benelli Pepe 50 weighs 93.0 kg (205.0 pounds).
How tall (seat height) is a Benelli Pepe 50?
The Benelli Pepe 50 seat height is 770 mm (30.3 inches) If adjustable, lowest setting.
How many gears does a Benelli Pepe 50 has?
The Benelli Pepe 50 has Automatic gears.