Benelli BN 302 Specs
(2017)
Benelli BN 302 General Information |
|
| Brand | Benelli |
| Model | Benelli BN 302 |
| Start year | 2017 |
| Year | 2017 |
| Category | Naked |
| Factory Warranty (Years / miles) | - |
Benelli BN 302 Dimensions, Aerodynamics and weight |
|
| Frame type | Steel trestle in steel tubes |
| Seat details | - |
| Wheelbase | 1,405 mm (55.3 inches) |
| Length | 2,130 mm (83.9 inches) |
| Width | 800 mm (31.5 inches) |
| Height | 1,120 mm (44.1 inches) |
| Seat Height | 795 mm (31.3 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | 175 mm (6.9 inches) |
| Trail size | - |
| Wheels details | Aluminum alloy |
| Front Tyres - Rims dimensions | 120/70-ZR17 |
| Rear Tyres - Rims dimensions | 160/60-ZR17 |
| Front brakes | Double disc. 4 pistons caliper |
| Rear brakes | Single disc. 2 pistons caliper |
| Front Brakes Dimensions - Disc Dimensions | 260 mm (10.2 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 240 mm (9.4 inches) |
| Curb Weight (including fluids) | 196.0 kg (432.1 pounds) |
| Dry Weight | 185.0 kg (407.9 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.2054 HP/kg |
| Fuel Tank Capacity | 16.00 litres (4.23 gallons) |
| Reserve Fuel Capacity | 3.00 litres (0.79 gallons) |
| Carrying Details and Capacity | - |
| Front Suspension | Inverted hydraulic damping shock absorber ø41 mm |
| Front Suspension Travel | - |
| Rear Suspension | Rear swing arm in steel pipes, rear shock absorber with spring preload adjustmen |
| Rear Suspension Travel | - |
Benelli BN 302 Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | Twin, four-stroke |
| Engine details | Horizontal cylinder |
| Fuel system | Injection. Two throttle bodies ø37 mm |
| Engine size - Displacement - Engine capacity | 300.00 ccm (18.31 cubic inches) |
| Bore x Stroke | 57.4 x 57.8 mm (2.3 x 2.3 inches) |
| Compression Ratio | 12.0:1 |
| Number of valves per cylinder | 4 |
| Camshaft Valvetrain Configuration | Double Overhead Cams/Twin Cam (DOHC) |
| Maximum power - Output - Horsepower | 38.00 HP (27.7 kW)) @ 10000 RPM |
| Maximum torque | 27.40 Nm (2.8 kgf-m or 20.2 ft.lbs) @ 9000 RPM |
| Engine Maximum RPM | - |
| Cooling system | Liquid |
| Lubrication system | Wet sump |
| Engine oil capacity | - |
| Exhaust system | - |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Wet clutch |
| Driveline | - |
Benelli BN 302 Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | Euro 3. Catalytic converter and oxygen sensor. |
Benelli BN 302 Electrical Systems, Ignition and Equipment |
|
| Ignition Type | Delphi MT05 |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | - |
| Lights | - |
How much horsepower does a Benelli BN 302 has?
The Benelli BN 302 has 38.00 HP (27.7 kW)) @ 10000 RPM.
How much does a Benelli BN 302 weighs?
The Benelli BN 302 weighs 185.0 kg (407.9 pounds).
How tall (seat height) is a Benelli BN 302?
The Benelli BN 302 seat height is 795 mm (31.3 inches) If adjustable, lowest setting.
How many gears does a Benelli BN 302 has?
The Benelli BN 302 has 6 gears.
The Benelli BN 302 has 38.00 HP (27.7 kW)) @ 10000 RPM.
How much does a Benelli BN 302 weighs?
The Benelli BN 302 weighs 185.0 kg (407.9 pounds).
How tall (seat height) is a Benelli BN 302?
The Benelli BN 302 seat height is 795 mm (31.3 inches) If adjustable, lowest setting.
How many gears does a Benelli BN 302 has?
The Benelli BN 302 has 6 gears.