Motorcycles Specs > Benelli > Benelli BN 125

Benelli BN 125 Specs

(2020)
Benelli BN 125 image
The Benelli BN 125 model is a Naked bike bike manufactured by Benelli . In this version sold from year 2020 , the dry weight is 142.0 kg (313.1 pounds) and it is equipped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 11.10 HP (8.1 kW)) @ 9500 RPM and a maximum torque of 10.00 Nm (1.0 kgf-m or 7.4 ft.lbs) @ 7000 RPM . With this drive-train, the Benelli BN 125 is capable of reaching a maximum top speed of  . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Benelli BN 125 has a Trestle in steel tubes frame with front suspension being Telescopic fork and at the rear, it is equipped with Rear swing arm with central shock absorber with spring pre-load adjustment . Stock tire sizes are 110/80-17 on the front, and 130/70-17 on the rear. As for stopping power, the Benelli BN 125 braking system includes Single disc size 260 mm (10.2 inches) at the front and Single disc size 240 mm (9.4 inches) at the back. 

Benelli BN 125 General Information

Brand Benelli 
Model Benelli BN 125 
Start year 2020 
Year 2020 
Category Naked bike 
Factory Warranty (Years / miles)

Benelli BN 125 Dimensions, Aerodynamics and weight

Frame type Trestle in steel tubes 
Seat details
Wheelbase 1,360 mm (53.5 inches) 
Length 2,050 mm (80.7 inches) 
Width 810 mm (31.9 inches) 
Height 1,065 mm (41.9 inches) 
Seat Height 770 mm (30.3 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance 190 mm (7.5 inches) 
Trail size
Wheels details
Front Tyres - Rims dimensions 110/80-17 
Rear Tyres - Rims dimensions 130/70-17 
Front brakes Single disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 260 mm (10.2 inches) 
Rear Brakes Dimensions - Disc Dimensions 240 mm (9.4 inches) 
Curb Weight (including fluids)
Dry Weight 142.0 kg (313.1 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio : 0.0782 HP/kg 
Fuel Tank Capacity 13.50 litres (3.57 gallons) 
Reserve Fuel Capacity
Carrying Details and Capacity
Front Suspension Telescopic fork 
Front Suspension Travel 111 mm (4.4 inches) 
Rear Suspension Rear swing arm with central shock absorber with spring pre-load adjustment 
Rear Suspension Travel 40 mm (1.6 inches) 

Benelli BN 125 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Injection. Electronic fuel injection with throttle body d.28 
Engine size - Displacement - Engine capacity 125.00 ccm (7.63 cubic inches) 
Bore x Stroke 54.0 x 54.5 mm (2.1 x 2.1 inches) 
Compression Ratio 9.8:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration
Maximum power - Output - Horsepower 11.10 HP (8.1 kW)) @ 9500 RPM 
Maximum torque 10.00 Nm (1.0 kgf-m or 7.4 ft.lbs) @ 7000 RPM 
Engine Maximum RPM
Cooling system Air 
Lubrication system Wet sump 
Engine oil capacity
Exhaust system
Gearbox 5-speed 
Transmission type, final drive ratio Chain 
Clutch type
Driveline

Benelli BN 125 Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency 1.70 litres/100 km (58.8 km/l or 138.37 mpg) 
CO2 emissions 39.4 CO2 g/km. (CO2 - Carbon dioxide emission) 
Emissions Euro 4. Catalytic Converter and Oxygen Sensor. 

Benelli BN 125 Electrical Systems, Ignition and Equipment

Ignition Type TCI 
Electrical Details
Starter Type Electric 
Instruments
Lights
How much horsepower does a Benelli BN 125 have?
The Benelli BN 125 has 11.10 HP (8.1 kW)) @ 9500 RPM.

How much does a Benelli BN 125 weighs?
The Benelli BN 125 weighs 142.0 kg (313.1 pounds).

How tall (seat height) is a Benelli BN 125?
The Benelli BN 125 seat height is 770 mm (30.3 inches) If adjustable, lowest setting.

How many gears does a Benelli BN 125 have?
The Benelli BN 125 have 5 gears.