Motorcycles Specs > Aprilia > Aprilia Pegaso Tuscany Tibet

Aprilia Pegaso Tuscany Tibet Specs

(2005)
The Aprilia Pegaso Tuscany Tibet model is a Enduro / offroad bike manufactured by Aprilia . In this version sold from year 2005 , the dry weight is  and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 35.00 HP (25.5 kW) @ 6500 RPM and a maximum torque of 58.00 Nm (5.9 kgf-m or 42.8 ft.lbs) @ 6250 RPM . With this drive-train, the Aprilia Pegaso Tuscany Tibet is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Aprilia Pegaso Tuscany Tibet have a Sloping aluminium twin spar frame, with steel box section at the front acting as oil tank. frame with front suspension being  and in the rear suspension it is equiped with Varying section high strength steel swing-arm . Stock tire sizes are 100/90-19. on the front, and 130/80-17. on the rear. As for stopping power, the Aprilia Pegaso Tuscany Tibet braking system includes Double disc size 300 mm (11.8 inches) at the front and Single disc size 270 mm (10.6 inches) at the rear. 

Aprilia Pegaso Tuscany Tibet General Information

Brand Aprilia 
Model Aprilia Pegaso Tuscany Tibet 
Start year 2005 
Year 2005 
Category Enduro / offroad 
Factory Warranty (Years / miles)

Aprilia Pegaso Tuscany Tibet Dimensions, Aerodynamics and weight

Frame type Sloping aluminium twin spar frame, with steel box section at the front acting as oil tank. 
Seat details
Wheelbase 1,487 mm (58.5 inches) 
Length
Width
Height
Seat Height 1,115 mm (43.9 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size 115 mm (4.5 inches) 
Wheels details
Front Tyres - Rims dimensions 100/90-19. 
Rear Tyres - Rims dimensions 130/80-17. 
Front brakes Double disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 300 mm (11.8 inches) 
Rear Brakes Dimensions - Disc Dimensions 270 mm (10.6 inches) 
Curb Weight (including fluids)
Dry Weight
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 25.00 litres (6.61 gallons) 
Reserve Fuel Capacity 5.00 litres (1.32 gallons) 
Carrying Details and Capacity
Front Suspension
Front Suspension Travel 165 mm (6.5 inches) 
Rear Suspension Varying section high strength steel swing-arm 
Rear Suspension Travel 175 mm (6.9 inches) 

Aprilia Pegaso Tuscany Tibet Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Injection. Integrated electronic engine management system. Indirect multi-point electronic injection. 
Engine size - Displacement - Engine capacity 651.80 ccm (39.77 cubic inches) 
Bore x Stroke 100.0 x 83.0 mm (3.9 x 3.3 inches) 
Compression Ratio 9.1:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration
Maximum power - Output - Horsepower 35.00 HP (25.5 kW) @ 6500 RPM 
Maximum torque 58.00 Nm (5.9 kgf-m or 42.8 ft.lbs) @ 6250 RPM 
Engine Maximum RPM
Cooling system Liquid 
Lubrication system Dry sump with two trochoidal pumps. 
Engine oil capacity
Exhaust system
Gearbox 5-speed 
Transmission type, final drive ratio Chain 
Clutch type Multiple disk in oil bath. Cable control. 
Driveline

Aprilia Pegaso Tuscany Tibet Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions

Aprilia Pegaso Tuscany Tibet Electrical Systems, Ignition and Equipment

Ignition Type Electronic, controlled by injection control unit. 
Electrical Details
Starter Type Electric 
Instruments
Lights
How much horsepower does a Aprilia Pegaso Tuscany Tibet have?
The Aprilia Pegaso Tuscany Tibet has 35.00 HP (25.5 kW) @ 6500 RPM.

How tall (seat height) is a Aprilia Pegaso Tuscany Tibet?
The Aprilia Pegaso Tuscany Tibet seat height is 1,115 mm (43.9 inches) If adjustable, lowest setting.