Motorcycles Specs > Aprilia > Aprilia Pegaso 650 Factory

Aprilia Pegaso 650 Factory Specs

The Aprilia Pegaso 650 Factory model is a Allround bike manufactured by Aprilia . In this version sold from year 2008 , the dry weight is  and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of 48.00 HP (35.0 kW) @ 6000 RPM and a maximum torque of 59.00 Nm (6.0 kgf-m or 43.5 ft.lbs) @ 5000 RPM . With this drive-train, the Aprilia Pegaso 650 Factory is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Aprilia Pegaso 650 Factory have a Steel, open cradle, single spar frame. frame with front suspension being 45 mm fork. Wheel travel 140 mm. and in the rear suspension it is equiped with High strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. . Stock tire sizes are 110/70-17 on the front, and 160/60-17 on the rear. As for stopping power, the Aprilia Pegaso 650 Factory braking system includes Single disc size 320 mm (12.6 inches) at the front and Single disc size 240 mm (9.4 inches) at the rear. 

Aprilia Pegaso 650 Factory General Information

Brand Aprilia 
Model Aprilia Pegaso 650 Factory 
Start year 2008 
Year 2008 
Category Allround 
Factory Warranty (Years / miles)

Aprilia Pegaso 650 Factory Dimensions, Aerodynamics and weight

Frame type Steel, open cradle, single spar frame. 
Seat details
Wheelbase 1,479 mm (58.2 inches) 
Length 2,173 mm (85.6 inches) 
Width 810 mm (31.9 inches) 
Seat Height 780 mm (30.7 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size 129 mm (5.1 inches) 
Wheels details
Front Tyres - Rims dimensions 110/70-17 
Rear Tyres - Rims dimensions 160/60-17 
Front brakes Single disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 320 mm (12.6 inches) 
Rear Brakes Dimensions - Disc Dimensions 240 mm (9.4 inches) 
Curb Weight (including fluids)
Dry Weight
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 16.00 litres (4.23 gallons) 
Reserve Fuel Capacity 3.50 litres (0.92 gallons) 
Carrying Details and Capacity
Front Suspension 45 mm fork. Wheel travel 140 mm. 
Front Suspension Travel
Rear Suspension High strength steel swingarm. Aprilia Progressive System (APS) rising rate linkages. 
Rear Suspension Travel

Aprilia Pegaso 650 Factory Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details
Fuel system Injection. Integrated electronic engine management system. Electronic fuel injection. 
Engine size - Displacement - Engine capacity 660.00 ccm (40.27 cubic inches) 
Bore x Stroke 100.0 x 84.0 mm (3.9 x 3.3 inches) 
Compression Ratio 10.0:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration SOHC 
Maximum power - Output - Horsepower 48.00 HP (35.0 kW) @ 6000 RPM 
Maximum torque 59.00 Nm (6.0 kgf-m or 43.5 ft.lbs) @ 5000 RPM 
Engine Maximum RPM
Cooling system Liquid 
Lubrication system Dry sump with oil pump. 
Engine oil capacity
Exhaust system
Gearbox 5-speed 
Transmission type, final drive ratio
Clutch type

Aprilia Pegaso 650 Factory Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions

Aprilia Pegaso 650 Factory Electrical Systems, Ignition and Equipment

Ignition Type Electronic. 
Electrical Details
Starter Type Electric 
How much horsepower does a Aprilia Pegaso 650 Factory have?
The Aprilia Pegaso 650 Factory has 48.00 HP (35.0 kW) @ 6000 RPM.

How tall (seat height) is a Aprilia Pegaso 650 Factory?
The Aprilia Pegaso 650 Factory seat height is 780 mm (30.7 inches) If adjustable, lowest setting.