English Français Deutsch Svensk Português PT Español русский Italiano 中文 български Nederlands Polski Português BR Türkçe
UltimateSpecs.com   Cars Motorcycles
Motorcycles Specs > Aprilia > Aprilia Leonardo 300

Aprilia Leonardo 300 Specs

The Aprilia Leonardo 300 model is a Scooter bike manufactured by Aprilia . In this version sold from year 2005 , the dry weight is  and it is equiped with a Single cylinder, four-stroke motor. The engine produces a maximum peak output power of  and a maximum torque of  . With this drive-train, the Aprilia Leonardo 300 is capable of reaching a maximum top speed of  . Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Aprilia Leonardo 300 have a High tensile tubular steel. Single spar at front, upper double cradle at rear. frame with front suspension being 35 mm hydraulic fork with forward mounted wheel. and in the rear suspension it is equiped with Engine unit acting as swinging arm. . Stock tire sizes are 130/70-12 on the front, and 130/70-12 on the rear. As for stopping power, the Aprilia Leonardo 300 braking system includes Single disc size 220 mm (8.7 inches) at the front and Single disc size 220 mm (8.7 inches) at the rear. 

Aprilia Leonardo 300 General Information

Brand Aprilia 
Model Aprilia Leonardo 300 
Year 2005 
Year 2005 
Category Scooter 
Factory Warranty (Years / miles)  

Aprilia Leonardo 300 Dimensions, Aerodynamics and weight

Frame type High tensile tubular steel. Single spar at front, upper double cradle at rear. 
Seat details  
Wheelbase 1,340 mm (52.8 inches) 
Length 1,865 mm (73.4 inches) 
Width 770 mm (30.3 inches) 
Height 1,410 mm (55.5 inches) 
Seat Height 678 mm (26.7 inches) If adjustable, lowest setting. 
Alternate Seat Height  
Ground Clearance 250 mm (9.8 inches) 
Trail size  
Wheels details  
Front Tyres - Rims dimensions 130/70-12 
Rear Tyres - Rims dimensions 130/70-12 
Front brakes Single disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Rear Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Curb Weight (including fluids)  
Dry Weight  
Front Percentage of Weight  
Rear Percentage of Weight  
Weight-Power Output Ratio :  
Fuel Tank Capacity 9.30 litres (2.46 gallons) 
Reserve Fuel Capacity  
Carrying Details and Capacity  
Front Suspension 35 mm hydraulic fork with forward mounted wheel. 
Front Suspension Travel 90 mm (3.5 inches) 
Rear Suspension Engine unit acting as swinging arm. 
Rear Suspension Travel 104 mm (4.1 inches) 

Aprilia Leonardo 300 Engine and Transmission Technical Data

Engine type - Number of cylinders Single cylinder, four-stroke 
Engine details  
Fuel system Carburettor. Mikuni BS 26 
Engine size - Displacement - Engine capacity 264.50 ccm (16.14 cubic inches) 
Bore x Stroke 71.0 x 66.8 mm (2.8 x 2.6 inches) 
Compression Ratio 10.0:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration OHC 
Maximum power - Output - Horsepower  
Maximum torque  
Engine Maximum RPM  
Cooling system Liquid 
Lubrication system Wet sump. Forced circulation with orbital pump 
Engine oil capacity  
Exhaust system Catalysed with secondary air system. Conforms to Euro 2 standards. 
Gearbox  
Transmission type, final drive ratio Chain 
Clutch type Automatic centrifugal dry clutch 
Driveline  

Aprilia Leonardo 300 Performance

Top Speed  
Acceleration 0 to 100 km/h (0 to 62 mph)  
Acceleration 0 to 400m (1/4 mile)  
Recuperation 60 to 140 km/h in highest gear  
Fuel Consumption - MPG - Economy - Efficiency  
CO2 emissions  
Emissions  

Aprilia Leonardo 300 Electrical Systems, Ignition and Equipment

Ignition Type Electronic 
Electrical Details  
Starter Type Electric 
Instruments  
Lights