Motorcycles Specs > Bimota > Bimota Tesi 3D

Bimota Tesi 3D Specs

Blank image
The Bimota Tesi 3D model is a Sport bike manufactured by Bimota . In this version sold from year 2009 , the dry weight is 168.0 kg (370.4 pounds) and it is equipped with a V2, four-stroke motor. The engine produces a maximum peak output power of and a maximum torque of . With this drive-train, the Bimota Tesi 3D is capable of reaching a maximum top speed of . On the topic of chassis characteristics, responsible for road holding, handling behavior and ride comfort, the Bimota Tesi 3D has a frame with front suspension being Extreme Tech Mono Shock PULL-ROD fully adjustable and at the rear, it is equipped with Extreme Tech Mono Shock fully adjustable, . Stock tire sizes are 120/70-ZR17 on the front, and 180/55-ZR17 on the rear. As for stopping power, the Bimota Tesi 3D braking system includes Double disc size 320 mm (12.6 inches) at the front and Single disc size 220 mm (8.7 inches) at the back.

Bimota Tesi 3D General Information

Brand Bimota 
Model Bimota Tesi 3D 
Start year 2009 
Year 2009 
Category Sport 
Factory Warranty (Years / miles)

Bimota Tesi 3D Dimensions, Aerodynamics and weight

Frame type
Seat details
Wheelbase 1,390 mm (54.7 inches) 
Length 2,005 mm (78.9 inches) 
Width 720 mm (28.3 inches) 
Height 1,140 mm (44.9 inches) 
Seat Height 810 mm (31.9 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance
Trail size
Wheels details
Front Tyres - Rims dimensions 120/70-ZR17 
Rear Tyres - Rims dimensions 180/55-ZR17 
Front brakes Double disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 320 mm (12.6 inches) 
Rear Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Curb Weight (including fluids)
Dry Weight 168.0 kg (370.4 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio :
Fuel Tank Capacity 16.00 litres (4.23 gallons) 
Reserve Fuel Capacity 5.00 litres (1.32 gallons) 
Carrying Details and Capacity
Front Suspension Extreme Tech Mono Shock PULL-ROD fully adjustable 
Front Suspension Travel 115 mm (4.5 inches) 
Rear Suspension Extreme Tech Mono Shock fully adjustable, 
Rear Suspension Travel 120 mm (4.7 inches) 

Bimota Tesi 3D Engine and Transmission Technical Data

Engine type - Number of cylinders V2, four-stroke 
Engine details
Fuel system Injection. Walbro 
Engine size - Displacement - Engine capacity 1079.00 ccm (65.84 cubic inches) 
Bore x Stroke 98.0 x 71.5 mm (3.9 x 2.8 inches) 
Compression Ratio 10.0:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration Desmodromic valve control 
Maximum power - Output - Horsepower
Maximum torque
Engine Maximum RPM 8500 
Cooling system Oil & air 
Lubrication system
Engine oil capacity
Exhaust system Euro 3 
Gearbox 6-speed 
Transmission type, final drive ratio
Clutch type

Bimota Tesi 3D Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions

Bimota Tesi 3D Electrical Systems, Ignition and Equipment

Ignition Type
Electrical Details
Starter Type Electric 
How much does a Bimota Tesi 3D weighs?
The Bimota Tesi 3D weighs 168.0 kg (370.4 pounds).

How tall (seat height) is a Bimota Tesi 3D?
The Bimota Tesi 3D seat height is 810 mm (31.9 inches) If adjustable, lowest setting.

How many gears does a Bimota Tesi 3D have?
The Bimota Tesi 3D have 6 gears.