Browse Car Specifications...

Impala 10 Versions

Chevrolet Impala 10 LT 2.5 Specs

(2016 - 2017) - Technical Specifications for Years 2016, 2017
With a curb weight of 3682 lbs (1670 kgs), the Impala 10 LT 2.5 has a naturally-aspirated Inline 4 cylinder engine, Petrol motor, with the engine code GM Ecotec LCV.
This engine produces a maximum power of 200 PS (197 bhp - 147 kW) at 6300 rpm and a maximum torque of 259 Nm (191 lb.ft) at 4400 rpm. The power is transmitted to the road by the front wheel drive (FWD) with a 6 speed Automatic gearbox.
On the topic of chassis details responsible for road holding, handling behavior and ride comfort, the Impala 10 has MacPherson strut, twin-tube dampers with gas-charged valving, 28.5mm hollow direct-acting stabilizer bar; hydraulic ride busing front suspension and Multilink with coil springs and stabilizer bar, gas-charged twin-tube dampers rear suspension. Stock tire sizes are 235 / 50 on 18 inch rims at the front, and 235 / 50 on 18 inch rims at the rear. For stopping power, the Impala 10 LT 2.5 braking system includes Vented Discs at the front and Discs at the rear.
The Impala 10 model is a Sedan car manufactured by Chevrolet, sold new from year 2016 until 2017, and available after that as a used car.

Chevrolet Impala 10 LT 2.5 Engine Technical Data Chevrolet Impala 10 LT 2.5 Engine Technical Data

Engine type - Number of cylinders : Inline 4
Engine Code : GM Ecotec LCV
Fuel type : Petrol
Fuel System : Direct Injection
Lubrication :
Coolant :
Engine Alignment : Transverse
Engine Position : Front
Engine size - Displacement - Engine capacity : 2457 cm3 or 149.9 cu-in
Bore x Stroke : 88 x 101 mm
3.46 x 3.98 inches
Number of valves : 16 Valves
Aspiration : N/A
Compression Ratio : 11.25
Maximum power - Output - Horsepower : 200 PS or 197 bhp or 147 kW @ 6300 rpm
Maximum torque : 259 Nm or 191 lb.ft @ 4400 rpm
Drive wheels - Traction - Drivetrain : FWD
Transmission Gearbox - Number of speeds :

Chevrolet Impala 10 LT 2.5 Fuel Consumption (Economy), Emissions and Range Chevrolet Impala 10 LT 2.5 Fuel Consumption (Economy), Emissions and Range

Fuel Tank Capacity : 70 L
15.4 UK gallons
18.5 US gallons
CO2 emissions :

Chevrolet Impala 10 LT 2.5 Performance Chevrolet Impala 10 LT 2.5 Performance

Top Speed : - km/h or - Mph
Acceleration 0 to 100 km/h (0 to 62 mph) : - s

Chevrolet Impala 10 LT 2.5 Size, Dimensions, Aerodynamics and Weight Chevrolet Impala 10 LT 2.5 Size, Dimensions, Aerodynamics and Weight

Body : Sedan
Num. of Doors : 4
Wheelbase : 283.7 cm or 111.69 inches
Length : 511.3 cm or 201.3 inches
Width : 185.4 cm or 72.99 inches
Height : 149.6 cm or 58.9 inches
Max. Towing Capacity Weight : 454 Kg or 1000.9 lbs
Aerodynamic drag coefficient - Cx : -
Front Brakes - Disc dimensions : Vented Discs (321 mm)
Rear Brakes - Dics dimensions : Discs (315 mm)
Front Tyres - Rims dimensions : 235/50 R18
Rear Tyres - Rims dimensions : 235/50 R18
Curb Weight : 1670 kg OR 3682 lbs
Trunk / Boot capacity : 532 L
Front Suspension : MacPherson strut, twin-tube dampers with gas-charged valving, 28.5mm hollow direct-acting stabilizer bar; hydraulic ride busing
Rear Suspension : Multilink with coil springs and stabilizer bar, gas-charged twin-tube dampers
What engine is in Chevrolet Impala 10 LT 2.5?
The Chevrolet Impala 10 LT 2.5 has a Inline 4, Petrol engine with 2457 cm3 / 149.9 cu-in capacity.

How many horsepower (hp) does a 2016 Chevrolet Impala 10 LT 2.5 have?
The 2016 Chevrolet Impala 10 LT 2.5 has 200 PS / 197 bhp / 147 kW.

How much does a Chevrolet Impala 10 LT 2.5 weighs?
The Chevrolet Impala 10 LT 2.5 weighs 1670 Kg / 3682 lbs.

Is Chevrolet Impala 10 LT 2.5 All Wheel Drive (AWD)?
No, the Chevrolet Impala 10 LT 2.5 is not All Wheel Drive (AWD). It's Front Wheel Drive (FWD).

If you found an error in these specifications