Challenger MT845 Specs
(2002)
Challenger MT845 General Information |
|
| Brand | Challenger |
| Model | Challenger MT845 |
| Start year | 2002 |
| End year | 2004 |
| Category / Type | Agricultural Crawler tractor |
| Distributor | - |
| Manufacturer | AGCO |
| Factory | USA |
| Serial Number Location | Serial number plate on the left side of the tractor frame. |
| Number of total built | - |
| Original Price (in USD) | - |
Challenger MT845 Chassis, dimensions, weight and tires |
|
| Cabin Type | Cab standard with air-conditioning. |
| Wheelbase | 118.1 in |
| Length | 265.9 in |
| Fuel Capacity | 305 |
| Operating Weight | - lbs |
| Front Tyres - Rims dimensions | 18-inch track |
| Rear Tyres - Rims dimensions | 18-inch track |
| Steering type | power |
| Brakes type | hydraulic wet disc |
Challenger MT845 Electrical System |
|
| Charging System | alternator |
| Charging Voltage | - volts |
| Ground | negative |
| Charging Amperage | 160 A |
| Number of batteries | 3 |
| Battery - voltage | 12 volts |
| Battery - Amp / Hour | - Ah |
| Battery - Cold Cranking Amperage | - A |
| Battery - Group | - |
| Engine Starter - voltage | 12 v |
Challenger MT845 Engine and Transmission Technical Data |
|
| Number of cylinders | 6-cylinder |
| Fuel Type | turbocharged diesel |
| Engine Code | Caterpillar C12 |
| Engine size - Displacement - Engine capacity | 729 ci |
| Bore x Stroke | 5.118x5.906 |
| Compression Ratio | 16.0:1 |
| Maximum power - Output - Horsepower | - hp @ 2100 rpm |
| Engine Cooling Type | liquid-cooled inline |
| Engine Air Filter / Cleaner | dual paper elements |
| Transmission Type | full power shift Caterpillar |
| Transmission / Gearbox gears | 16 forward and 4 reverse |
| Transmission Clutch | hydraulic wet disc |
| Drive wheels - Traction - Drivetrain | crawler |
Challenger MT845 PTO - Power Take-Off |
|
| Rear PTO Type | independent |
| Rear PTO Power (Tested) | 313 hp ( 393.14 hp) |
| Rear PTO RPM | 1000 (1.75) |
Challenger MT845 Drawbar |
|
| Drawbar Power (Tested) | - hp ( 297.93 hp) |
Challenger MT845 Hydraulics |
|
| Type | closed center load sensing |
| Nº of valves | - |
| Pump flow | 43.5 gpm |
| Steering flow | - gpm |