Zero Engineering Type 6 Specs
(2015)
Zero Engineering Type 6 General Information |
|
| Brand | Zero Engineering |
| Model | Zero Engineering Type 6 |
| Start year | 2015 |
| Year | 2015 |
| Category | Classic |
| Factory Warranty (Years / miles) | - |
Zero Engineering Type 6 Dimensions, Aerodynamics and weight |
|
| Frame type | Gooseneck frame |
| Seat details | - |
| Wheelbase | 1,600 mm (63.0 inches) |
| Length | 2,300 mm (90.6 inches) |
| Width | 720 mm (28.3 inches) |
| Height | 930 mm (36.6 inches) |
| Seat Height | 660 mm (26.0 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | 100 mm (3.9 inches) |
| Trail size | - |
| Wheels details | Wire spoked |
| Front Tyres - Rims dimensions | 5.00-16 |
| Rear Tyres - Rims dimensions | 5.00-16 |
| Front brakes | Single disc. Hydraulic |
| Rear brakes | Single disc. Hydraulic |
| Front Brakes Dimensions - Disc Dimensions | - |
| Rear Brakes Dimensions - Disc Dimensions | - |
| Curb Weight (including fluids) | - |
| Dry Weight | 227.0 kg (500.4 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | - |
| Fuel Tank Capacity | 7.50 litres (1.98 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Zero design springer fork |
| Front Suspension Travel | - |
| Rear Suspension | - |
| Rear Suspension Travel | - |
Zero Engineering Type 6 Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | V2, four-stroke |
| Engine details | S and S showelhead, panhead or nucklehead vintage enignes available |
| Fuel system | Carburettor. HSR carburetor |
| Engine size - Displacement - Engine capacity | 1520.00 ccm (92.75 cubic inches) |
| Bore x Stroke | 92.0 x 114.3 mm (3.6 x 4.5 inches) |
| Compression Ratio | - |
| Number of valves per cylinder | - |
| Camshaft Valvetrain Configuration | - |
| Maximum power - Output - Horsepower | - |
| Maximum torque | - |
| Engine Maximum RPM | - |
| Cooling system | Air |
| Lubrication system | - |
| Engine oil capacity | - |
| Exhaust system | - |
| Gearbox | 6-speed |
| Transmission type, final drive ratio | Chain |
| Clutch type | Baker 6 Speed, optional HD 5-speed |
| Driveline | Open primary. |
Zero Engineering Type 6 Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
Zero Engineering Type 6 Electrical Systems, Ignition and Equipment |
|
| Ignition Type | - |
| Electrical Details | - |
| Starter Type | Electric |
| Instruments | Analogue |
| Lights | - |
How much does a Zero Engineering Type 6 weighs?
The Zero Engineering Type 6 weighs 227.0 kg (500.4 pounds).
How tall (seat height) is a Zero Engineering Type 6?
The Zero Engineering Type 6 seat height is 660 mm (26.0 inches) If adjustable, lowest setting.
How many gears does a Zero Engineering Type 6 has?
The Zero Engineering Type 6 has 6 gears.
The Zero Engineering Type 6 weighs 227.0 kg (500.4 pounds).
How tall (seat height) is a Zero Engineering Type 6?
The Zero Engineering Type 6 seat height is 660 mm (26.0 inches) If adjustable, lowest setting.
How many gears does a Zero Engineering Type 6 has?
The Zero Engineering Type 6 has 6 gears.