English
English English
Motos
Cars
Motos
Tractors
Aircraft
menu



Motorcycles Specs > Triumph > Triumph Daytona 675 SE

Triumph Daytona 675 SE similar models


Triumph Daytona 675 SE Specs

(2011)
Blank image

Key Specs

In-line three, four-stroke
41.2 cu-in
675 cm3
122 HP
124.00 PS / 91 kW
6-speed
406 lbs
/ 184.6 kg

Triumph Daytona 675 SE General Information
Brand Triumph 
Model Triumph Daytona 675 SE 
Start year 2011 
Year 2011 
Category Sport 
Factory Warranty (Years / miles) - 

Triumph Daytona 675 SE Dimensions, Aerodynamics and weight
Frame type Aluminum beam twin spar 
Seat details - 
Wheelbase 1,394 mm (54.9 inches) 
Length 2,019 mm (79.5 inches) 
Width 709 mm (27.9 inches) 
Height 1,105 mm (43.5 inches) 
Seat Height 831 mm (32.7 inches) If adjustable, lowest setting. 
Alternate Seat Height - 
Ground Clearance - 
Trail size - 
Wheels details Cast aluminium alloy 5-spoke 
Front Tyres - Rims dimensions 120/70-ZR17 
Rear Tyres - Rims dimensions 180/55-ZR17 
Front brakes Double disc 
Rear brakes Single disc 
Front Brakes Dimensions - Disc Dimensions 308 mm (12.1 inches) 
Rear Brakes Dimensions - Disc Dimensions 220 mm (8.7 inches) 
Curb Weight (including fluids) 184.6 kg (407.0 pounds) 
Dry Weight - 
Front Percentage of Weight - 
Rear Percentage of Weight - 
Weight-Power Output Ratio : - 
Fuel Tank Capacity 17.41 litres (4.60 gallons) 
Reserve Fuel Capacity - 
Carrying Details and Capacity - 
Front Suspension Kayaba 41mm upside down forks with adjustable preload. rebound and high/low speed compression damping. 110mm wheel travel 
Front Suspension Travel - 
Rear Suspension Kayaba monoshock with piggy back reservoir adjustable for preload. rebound and high/low speed compression damping. 130mm rear wheel travel 
Rear Suspension Travel - 

Triumph Daytona 675 SE Engine and Transmission Technical Data
Engine type - Number of cylinders In-line three, four-stroke 
Engine details - 
Fuel system Injection. Multipoint sequential electronic fuel injection with forced air induction and SAI 
Engine size - Displacement - Engine capacity 675.00 ccm (41.19 cubic inches) 
Bore x Stroke 74.0 x 52.3 mm (2.9 x 2.1 inches) 
Compression Ratio 12.7:1 
Number of valves per cylinder 4 
Camshaft Valvetrain Configuration DOHC 
Maximum power - Output - Horsepower 124.00 HP (90.5 kW) @ 12600 RPM 
Maximum torque 71.87 Nm (7.3 kgf-m or 53.0 ft.lbs) @ 11700 RPM 
Engine Maximum RPM - 
Cooling system Liquid 
Lubrication system - 
Engine oil capacity 3.50 litres (3.70 quarts) 
Exhaust system Stainless steel 3 into 1 system with valve in secondary and under seat silencer 
Gearbox 6-speed 
Transmission type, final drive ratio Chain 
Clutch type Wet. multi-plate 
Driveline O ring chain. Primary drive: Gear. 

Triumph Daytona 675 SE Performance
Top Speed - 
Acceleration 0 to 100 km/h (0 to 62 mph) - 
Acceleration 0 to 400m (1/4 mile) - 
Recuperation 60 to 140 km/h in highest gear - 
Fuel Consumption - MPG - Economy - Efficiency - 
CO2 emissions - 
Emissions - 

Triumph Daytona 675 SE Electrical Systems, Ignition and Equipment
Ignition Type Digital-inductive type via engine management system 
Electrical Details - 
Starter Type Electric 
Instruments - 
Lights - 
How much horsepower does a Triumph Daytona 675 SE has?
The Triumph Daytona 675 SE has 124.00 HP (90.5 kW) @ 12600 RPM.

How tall (seat height) is a Triumph Daytona 675 SE?
The Triumph Daytona 675 SE seat height is 831 mm (32.7 inches) If adjustable, lowest setting.

How many gears does a Triumph Daytona 675 SE has?
The Triumph Daytona 675 SE has 6 gears.

Latest Motorcycles

©2024 Ultimate Specs - Motorcycles - Change consent

- About - Privacy policy - Contact US