Can-Am Spyder Roadster SE5 Specs
(2009)
Can-Am Spyder Roadster SE5 General Information |
|
| Brand | Can-Am |
| Model | Can-Am Spyder Roadster SE5 |
| Start year | 2009 |
| Year | 2009 |
| Category | Sport |
| Factory Warranty (Years / miles) | - |
Can-Am Spyder Roadster SE5 Dimensions, Aerodynamics and weight |
|
| Frame type | - |
| Seat details | - |
| Wheelbase | 1,727 mm (68.0 inches) |
| Length | 2,667 mm (105.0 inches) |
| Width | - |
| Height | - |
| Seat Height | 737 mm (29.0 inches) If adjustable, lowest setting. |
| Alternate Seat Height | - |
| Ground Clearance | 114 mm (4.5 inches) |
| Trail size | - |
| Wheels details | - |
| Front Tyres - Rims dimensions | 165/65-R14 |
| Rear Tyres - Rims dimensions | 225/50-R15 |
| Front brakes | Double disc. EBD, ABS. 4 piston calipers |
| Rear brakes | Single disc. EBD, ABS |
| Front Brakes Dimensions - Disc Dimensions | 260 mm (10.2 inches) |
| Rear Brakes Dimensions - Disc Dimensions | 260 mm (10.2 inches) |
| Curb Weight (including fluids) | - |
| Dry Weight | 317.0 kg (698.9 pounds) |
| Front Percentage of Weight | - |
| Rear Percentage of Weight | - |
| Weight-Power Output Ratio : | 0.3344 HP/kg |
| Fuel Tank Capacity | 25.00 litres (6.61 gallons) |
| Reserve Fuel Capacity | - |
| Carrying Details and Capacity | - |
| Front Suspension | Independent double A-arm |
| Front Suspension Travel | 144 mm (5.7 inches) |
| Rear Suspension | Swing Arm with monoshock |
| Rear Suspension Travel | 145 mm (5.7 inches) |
Can-Am Spyder Roadster SE5 Engine and Transmission Technical Data |
|
| Engine type - Number of cylinders | V2, four-stroke |
| Engine details | - |
| Fuel system | Injection. Multi-point EFI with 57 mm diameter throttle bodies |
| Engine size - Displacement - Engine capacity | 998.00 ccm (60.90 cubic inches) |
| Bore x Stroke | 97.0 x 68.0 mm (3.8 x 2.7 inches) |
| Compression Ratio | 10.8:1 |
| Number of valves per cylinder | - |
| Camshaft Valvetrain Configuration | DOHC |
| Maximum power - Output - Horsepower | 106.00 HP (77.4 kW) @ 8500 RPM |
| Maximum torque | 104.30 Nm (10.6 kgf-m or 76.9 ft.lbs) @ 6250 RPM |
| Engine Maximum RPM | - |
| Cooling system | Liquid |
| Lubrication system | - |
| Engine oil capacity | 4.50 litres (4.76 quarts) |
| Exhaust system | 2-into-1 with catalytic converter |
| Gearbox | Automatic |
| Transmission type, final drive ratio | Belt |
| Clutch type | Wet, multi-plate |
| Driveline | - |
Can-Am Spyder Roadster SE5 Performance |
|
| Top Speed | - |
| Acceleration 0 to 100 km/h (0 to 62 mph) | - |
| Acceleration 0 to 400m (1/4 mile) | - |
| Recuperation 60 to 140 km/h in highest gear | - |
| Fuel Consumption - MPG - Economy - Efficiency | - |
| CO2 emissions | - |
| Emissions | - |
Can-Am Spyder Roadster SE5 Electrical Systems, Ignition and Equipment |
|
| Ignition Type | Electronic ignition with dual output coil |
| Electrical Details | - |
| Starter Type | - |
| Instruments | - |
| Lights | - |
How much horsepower does a Can-Am Spyder Roadster SE5 has?
The Can-Am Spyder Roadster SE5 has 106.00 HP (77.4 kW) @ 8500 RPM.
How much does a Can-Am Spyder Roadster SE5 weighs?
The Can-Am Spyder Roadster SE5 weighs 317.0 kg (698.9 pounds).
How tall (seat height) is a Can-Am Spyder Roadster SE5?
The Can-Am Spyder Roadster SE5 seat height is 737 mm (29.0 inches) If adjustable, lowest setting.
How many gears does a Can-Am Spyder Roadster SE5 has?
The Can-Am Spyder Roadster SE5 has Automatic gears.
The Can-Am Spyder Roadster SE5 has 106.00 HP (77.4 kW) @ 8500 RPM.
How much does a Can-Am Spyder Roadster SE5 weighs?
The Can-Am Spyder Roadster SE5 weighs 317.0 kg (698.9 pounds).
How tall (seat height) is a Can-Am Spyder Roadster SE5?
The Can-Am Spyder Roadster SE5 seat height is 737 mm (29.0 inches) If adjustable, lowest setting.
How many gears does a Can-Am Spyder Roadster SE5 has?
The Can-Am Spyder Roadster SE5 has Automatic gears.