Benelli TNT R Specs

(2015)
Blank image

Key Specs

In-line three, four-stroke
156 HP
157.80 PS / 116 kW
6-speed
474 lbs
/ 215.0 kg

Benelli TNT R General Information

Brand Benelli 
Model Benelli TNT R 
Start year 2015 
Year 2015 
Category Naked 
Factory Warranty (Years / miles)

Benelli TNT R Dimensions, Aerodynamics and weight

Frame type Decomposable, front steel trestle, rear aluminium alloy casting 
Seat details
Wheelbase 1,443 mm (56.8 inches) 
Length 2,100 mm (82.7 inches) 
Width
Height 1,050 mm (41.3 inches) 
Seat Height 830 mm (32.7 inches) If adjustable, lowest setting. 
Alternate Seat Height
Ground Clearance 135 mm (5.3 inches) 
Trail size 95 mm (3.7 inches) 
Wheels details Aluminium alloy 
Front Tyres - Rims dimensions 120/70-ZR17 
Rear Tyres - Rims dimensions 180/55-ZR17 
Front brakes Double disc. Floating Wave disk mm with radial monoblock 4 pistons calipers 
Rear brakes Single disc. Wave disk with double piston caliper 
Front Brakes Dimensions - Disc Dimensions 320 mm (12.6 inches) 
Rear Brakes Dimensions - Disc Dimensions 240 mm (9.4 inches) 
Curb Weight (including fluids) 215.0 kg (474.0 pounds) 
Dry Weight 205.0 kg (451.9 pounds) 
Front Percentage of Weight
Rear Percentage of Weight
Weight-Power Output Ratio : 0.7698 HP/kg 
Fuel Tank Capacity 16.00 litres (4.23 gallons) 
Reserve Fuel Capacity 4.00 litres (1.06 gallons) 
Carrying Details and Capacity
Front Suspension 50 mm upside-down fork, with hydraulic rebound / compression and spring preload adjustments 
Front Suspension Travel 120 mm (4.7 inches) 
Rear Suspension Steel tube trestle swingarm, rear dumper with hydraulic adjustment (rebound, high and low speed compression) and spring preload assembled with progressive link 
Rear Suspension Travel 120 mm (4.7 inches) 

Benelli TNT R Engine and Transmission Technical Data

Engine type - Number of cylinders In-line three, four-stroke 
Engine details Balancer shaft 
Fuel system Injection. Three throttle bodies ΓΈ53 mm 
Engine size - Displacement - Engine capacity 1131.00 ccm (69.01 cubic inches) 
Bore x Stroke 88.0 x 62.0 mm (3.5 x 2.4 inches) 
Compression Ratio 12.5:1 
Number of valves per cylinder
Camshaft Valvetrain Configuration Double Overhead Cams/Twin Cam (DOHC) 
Maximum power - Output - Horsepower 157.80 HP (115.2 kW)) @ 10200 RPM 
Maximum torque 120.00 Nm (12.2 kgf-m or 88.5 ft.lbs) @ 8400 RPM 
Engine Maximum RPM
Cooling system Liquid 
Lubrication system Wet sump 
Engine oil capacity 4.00 litres (4.23 quarts) 
Exhaust system With catalytic converter and oxigen sensor 
Gearbox 6-speed 
Transmission type, final drive ratio Chain 
Clutch type Dry clutch with hydraulic command with slipper device 
Driveline 44/79 primary drive 

Benelli TNT R Performance

Top Speed
Acceleration 0 to 100 km/h (0 to 62 mph)
Acceleration 0 to 400m (1/4 mile)
Recuperation 60 to 140 km/h in highest gear
Fuel Consumption - MPG - Economy - Efficiency
CO2 emissions
Emissions Euro 3 

Benelli TNT R Electrical Systems, Ignition and Equipment

Ignition Type Walbro ECUA-1 
Electrical Details
Starter Type Electric 
Instruments
Lights
How much horsepower does a Benelli TNT R has?
The Benelli TNT R has 157.80 HP (115.2 kW)) @ 10200 RPM.

How much does a Benelli TNT R weighs?
The Benelli TNT R weighs 205.0 kg (451.9 pounds).

How tall (seat height) is a Benelli TNT R?
The Benelli TNT R seat height is 830 mm (32.7 inches) If adjustable, lowest setting.

How many gears does a Benelli TNT R has?
The Benelli TNT R has 6 gears.