|
|
Generation : | Corvette C3 - 1968 New Model |
Body : | Cabrio |
Num. of Doors : | 2 doors |
|
|
Engine type - Number of cylinders : | V 8 |
Engine Code : | GM Chevrolet Small-Block V8 327 |
Fuel type : | Petrol |
Fuel System : | Rochester Quadrajet Carburetor |
Lubrication : |
See oil information Engine oil capacity (with filter): 4.7 L |
Engine Alignment : | Longitudinal |
Engine Position : | Front |
Engine displacement : | 326.7 cu-in / 5354 cm3 |
Bore x Stroke : |
4 x 3.25 inches 101.6 x 82.6 mm |
Number of valves : | 16 Valves |
Aspiration : | naturally-aspirated |
Compression Ratio : | 10.00 |
Horsepower : |
300 HP / 304 PS / 224 kW @ 5000 rpm |
Maximum torque : |
359 lb-ft / 488 Nm @ 3400 rpm |
Drive wheels - Traction - Drivetrain : | RWD |
Transmission Gearbox - Number of speeds : |
3 speed Automatic
|
|
|
Fuel Tank Capacity : |
20.1 gallons 76 L 16.7 UK gallons |
|
|
Top Speed : | - Mph / - km/h |
Acceleration 0 to 100 km/h (0 to 62 mph) : | - s |
|
|
Wheelbase : | 97.99 inches / 248.9 cm |
Length : | 182.09 inches / 462.5 cm |
Width : | 69.21 inches / 175.8 cm |
Height : | 47.91 inches / 121.7 cm |
Front Axle : | 58.31 inches / 148.1 cm |
Rear Axle : | 59.02 inches / 149.9 cm |
Aerodynamic drag coefficient - Cx : | - |
Curb Weight : | 3280 lbs / 1488 kg |
Weight/Power Output Ratio : | 4.9 kg/hp |
|
|
Num. of Seats : | 2 seats |
Trunk / Boot capacity : | - |
|
|||
Front Brakes - Disc dimensions : |
Discs (11.73 inches / 298 mm) |
||
Rear Brakes - Disc dimensions : |
Discs (11.73 inches / 298 mm) |
||
Front Tyres - Rims dimensions : | 7.75/- R15 | ||
Rear Tyres - Rims dimensions : | 7.75/- R15 | ||
Steering : | Recirculating bearing ball and nut steering. Hydraulic Power-Steering Optional (code N40) | ||
Turning circle : | 37.1 feet / 11.3 m | ||
Steering wheel lock-to-lock : | 3.4 turns | ||
Steering ratio : | 16.0 | ||
Front Suspension : | Independent, SLA Type, Coil Springs, Stabilizer Bar (327 and 350 V8: 0.75 in/diam; 427 V8: 0.9375 in/diam) | ||
Rear Suspension : | Full independent with frame-anchored differencial. 3-Links: tubular axle drive shafts, torque control arms and transverse strut rods. Leaf springs. Stabilizer bar 0.562 in/diam (427 V8 only) |
©2024 Ultimate Specs - The Most Comprehensive Car Specifications Database. Over 46.000 technical specs!! - Change consent - Do not share my Personal Information. -
About -
Privacy Policy -
Contact US
|